never jerk a stuck truck with a chain

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Redfish

Full Access Member
Joined
Nov 6, 2021
Posts
2,842
Reaction score
15,234
Location
Prairieville, LA
First Name
Andrew
Truck Year
1987
Truck Model
V1500
Engine Size
350/5.7
@PrairieDrifter I recently picked up a couple soft shackles and I am pleased with them. I am almost ashamed to admit that I got them because I didn't like the cosmetic damage that my chains were doing on and around the front tow hooks on my Duramax. These eliminate that and they work very well. One for my Duramax and one for Pop's AT4. I don't think he has used his yet but we have used mine several times and I am a believer.
 

TurboDog

Full Access Member
Joined
Jul 11, 2024
Posts
66
Reaction score
160
Location
Laramie, WY
First Name
Dwight
Truck Year
1987
Truck Model
V30
Engine Size
388
Is it a problem to connect my strap to the receiver hitch using the pin?
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,993
Reaction score
5,970
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
Is it a problem to connect my strap to the receiver hitch using the pin?
Frowned upon. If I'm understanding what you want. You want to slip the loop of the strap inside the receiver hitch and connect it with the receiver pin?

Can't do that. The edges of the inside of the receiver hitch will cut straps. Also can't trust pin ratings doing that because you're basically pulling from the center of the pin, unlike the hitch does.
 

TurboDog

Full Access Member
Joined
Jul 11, 2024
Posts
66
Reaction score
160
Location
Laramie, WY
First Name
Dwight
Truck Year
1987
Truck Model
V30
Engine Size
388
I have done this many times and not cut the strap. But is the pin strong enough? Looks like the pin is still intact in the pictures where the hitch broke.

I am using a tow strap, 3" x 30 ft...is that only for towing? Should it be a 'recovery strap'?
 
Last edited:

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,993
Reaction score
5,970
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
I have done this many times and not cut the strap. But is the pin strong enough? Looks like the pin is still intact in the pictures where the hitch broke.

I can go buy one of those inserts that go into the receiver and have a D ring on the end.
if it is really necessary.
I'm not saying it can't be done. Like I said, frowned upon. I have one of the d ring receivers. Much handier, especially in the freezing cold.
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
2,027
Reaction score
2,642
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
I have done this many times and not cut the strap. But is the pin strong enough? Looks like the pin is still intact in the pictures where the hitch broke.

I am using a tow strap, 3" x 30 ft...is that only for towing? Should it be a 'recovery strap'?

You touched on another issue - "is the pin strong enough?" You'll be in a pickle if you ever bend the pin, you wont be able to get it (or the strap) out without cutting and beating on it for a while.

The hot product now is kinetic ropes for yanking out stuck vehicles. The flat straps are great and have been around forever (I've got a few of various sizes) but you have to be sure what it's rated for towing or recovery/snatching, this info is probably only on the original packaging (I don't remember tags on my straps but it's been a while).
 

TurboDog

Full Access Member
Joined
Jul 11, 2024
Posts
66
Reaction score
160
Location
Laramie, WY
First Name
Dwight
Truck Year
1987
Truck Model
V30
Engine Size
388
I don't do any yanking when I help get a vehicle out of a ditch in the winter time....that's about all the recovery I ever need to do. If I can't pull them out, I can get them a ride to a towing outfit. I live in a semi remote area and folks do help each other. I think I will go ahead and get a receiver shackle D Ring to be nicer to my strap.

Thanks for all the input
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,896
Reaction score
9,905
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Reminder,this man was killed trying to jerk a truck loose. And this was with a strap, broke the end of the receiver off,sent it through the windshield. I doubt a strap blanket would have helped,but couldn't have hurt
 

Attachments

  • Screenshot_2025-02-05_175644.jpg
    Screenshot_2025-02-05_175644.jpg
    225 KB · Views: 14
  • Screenshot_2025-02-05_175656.jpg
    Screenshot_2025-02-05_175656.jpg
    80.9 KB · Views: 15
Last edited:

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,115
Reaction score
3,165
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
I was using a kinetic rope several time a month a few winters ago when going out snow wheeling with the off road club. It is amazing how well they work. IF you have the proper anchor points, the proper equipment and just give them a slight bump. You don't back all the way up and floor it to "get some momentum". The rope stretching makes for a nice gentle recovery and will pop them right out of the hole they dug themselves.
I have a bubba rope and a rope from yankum ropes. And multiple softshackles. I do have D rings for the front bumper but that is because the sharp edges to the recovery holes would likely damage the rope.

full
 
Last edited:

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
2,027
Reaction score
2,642
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
Reminder,this man was killed trying to jerk a truck loose. And this was with a strap, broke the end of the receiver off,sent it through the windshield. I doubt a strap blanket would have helped,but couldn't have hurt

A sad situation indeed.

I have a Warn receiver hitch insert designed for a clevis and it's solid, not hollow or tubing.
 

waterpirate

Full Access Member
Joined
Jan 2, 2019
Posts
975
Reaction score
2,387
Location
delaware
First Name
Eric
Truck Year
1987
Truck Model
v10
Engine Size
5.7 tbi
Sort of off topic, but the young adults had my avatar drill rig in a bind and jerked it with a junk chain. Driver of the rig $hit himself as the half of chain came through the windshield. No one was hurt thank God, but they went to summer school on safety training.
Eric
 

Latest posts

Forum statistics

Threads
44,770
Posts
967,779
Members
37,507
Latest member
malanr
Top