My 1980 K20 with a Quadrajet left me stranded...help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

roguewave

Full Access Member
Joined
Apr 19, 2016
Posts
66
Reaction score
166
Location
Texas Hill Country/South Portland, Maine
First Name
Bobert
Truck Year
76,83,84,87,87,88.
Truck Model
4X4
Engine Size
350,383,454
You must be registered for see images
Did one of my fly,buy and drive hairbrain things, it’s very nice original truck with no rust.

I think it sat for a bit but ran fair when I left the sellers house to drive 1400 miles home. Got stuck in traffic right away on the 210 freeway in San Bernardino, Calif. After about 20 miles it started to not idle while in traffic, I did the neutral to drive thing to keep it going. After traffic let up I thought I’d be OK, got it running along at 60 mph and it started to bog down, felt like a fuel issue. I limped off the freeway to a gas station parking lot and tried to find the answer. Carb # is 17057204, I didn’t bring tools along this time except for a 4 in one screwdriver and a mini crescent wrench.

my question is...can I partially rebuild/clean it in the parking lot? Have not really rebuilt one before but willing to give it a shot. I’ll walk to Oreillys this morning first thing and try and get a kit for it and some tools. I did undo the fuel line and stuck it in a bottle and cranked it over, it seems to be pumping fine. Took off the inline fuel filter and tapped it on the ground but saw no trash in it.

thoughts ?


Full of high hopes before leaving LOL

You must be registered for see images attach
 
Last edited:

AKguy

Full Access Member
Joined
Feb 16, 2019
Posts
543
Reaction score
892
Location
Alaska
First Name
Randy
Truck Year
1981
Truck Model
K30 Crew Cab Silverado
Engine Size
460
I would install a rebuilt carb and drive it home.
 

roguewave

Full Access Member
Joined
Apr 19, 2016
Posts
66
Reaction score
166
Location
Texas Hill Country/South Portland, Maine
First Name
Bobert
Truck Year
76,83,84,87,87,88.
Truck Model
4X4
Engine Size
350,383,454
Just discovered the charcoal canister sent crap into the carb. Saw all these, what I thought were mouse turds, turned out to be charcoal hah! Hopefully on the road soon, we’ll see...

Thanks for the suggestions
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,253
Reaction score
12,180
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
I was just going to suggest inlet filter. But I guess it is either did it's job or didn't.

Good luck with the repair.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,086
Reaction score
12,465
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Leave it there, I’ll be down with a trailer by tomorrow morning. Leave title in glovebox please! you shouldn’t have to endure that clunker!

seriously, awesome looking truck.
Did you get the carb cleaned out?
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,884
Reaction score
18,741
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
Hope you got it fixed and made it home ok.

Does it have a catalytic converter?
 

roguewave

Full Access Member
Joined
Apr 19, 2016
Posts
66
Reaction score
166
Location
Texas Hill Country/South Portland, Maine
First Name
Bobert
Truck Year
76,83,84,87,87,88.
Truck Model
4X4
Engine Size
350,383,454
Back on the road, made it to Blythe. I found a real cool guy within walking distance of the truck, go figure, he took carb off and rebuilt it this morning. It had all kinds of charcoal inside. Runs like a top now....so far. Slept ( not much) in the cold cab last night, I’m bailing early today. Zzzzzz
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,485
Reaction score
3,890
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
I have seen the charcoal canister clog up the float bowl before. It does occasionally happen, not sure how or why it happens. That vacuum line is designed to collect fuel vapors snd store them in the canister, so how does the charcoal chunks get sucked up into the carb? The float bowl isn’t under vacuum.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,596
Reaction score
9,111
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
I have seen the charcoal canister clog up the float bowl before. It does occasionally happen, not sure how or why it happens. That vacuum line is designed to collect fuel vapors snd store them in the canister, so how does the charcoal chunks get sucked up into the carb? The float bowl isn’t under vacuum.

My thought would be the canister isn't being purged, due to a pinched vacuum line etc. So as tank pressure builds the charcoal is pushed under pressure not brought up by vacuum through the bowl vent.
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,485
Reaction score
3,890
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
That makes sense. I suppose it wouldn’t take much pressure to move those tiny chunks.
 

Powerhouse Ranch

3G Connoisseur
Joined
Jan 6, 2021
Posts
1,467
Reaction score
2,632
Location
PA
First Name
Luke
Truck Year
1980 & 1988
Truck Model
C25 & V15
Engine Size
454 & 350
very nice truck! love the fly, buy and drive method, would love to do that one of these days
 

Salty Crusty

Full Access Member
Joined
Apr 10, 2020
Posts
211
Reaction score
231
Location
Texas
First Name
Gary
Truck Year
1986
Truck Model
c1500
Engine Size
565
Good on you, great looking truck.

Nothing in the world wrong with a quadrajet and rebuilt correctly, it'll give you great fuel economy (for a carb in a truck with the aerodynamics of a wall) and last forever.

I flew from Lubbock TX to KC and drove an '85 Mercedes convertible home once in freezing weather after a blizzard. It was either that or miss the car and that wasn't going to happen. When you find the right one, you'll do whatever it takes to get it home including having the carb rebuilt :D
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
16,026
Reaction score
25,569
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
Good on you, great looking truck.

Nothing in the world wrong with a quadrajet and rebuilt correctly, it'll give you great fuel economy (for a carb in a truck with the aerodynamics of a wall) and last forever.

I flew from Lubbock TX to KC and drove an '85 Mercedes convertible home once in freezing weather after a blizzard. It was either that or miss the car and that wasn't going to happen. When you find the right one, you'll do whatever it takes to get it home including having the carb rebuilt :D
Thats some roadkill stuff there
 

Latest posts

Forum statistics

Threads
44,414
Posts
956,953
Members
36,735
Latest member
rljohnson013
Top