Magnetic Block Heaters, Gas Engine?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gill finn

Junior Member
Joined
Mar 31, 2023
Posts
14
Reaction score
10
Location
Massachusetts
First Name
Graham
Truck Year
1984
Truck Model
C20
Engine Size
350
Hello all, since we've entered the winter chill arena, the old 350 in my '84 c20 is a bit cranky in the colder weather. I can give it a tiny shot of starter ether and she cranks right up, but I'm wondering if anyone's yet tried one of these aftermarket magnetic block heaters? I've seen some videos of guys using them on older tractors without them, just sticking it to the side of the oil pan and I'd imagine the oil would contain a good core heat value once it heats up. Anyway, just wondering if someone's had some experience or am I just wasting $. Thanks a lot for any help and happy belated new year!

g
 

Turbo4whl

Supporting Member
Supporting Member
Joined
Oct 30, 2019
Posts
3,194
Reaction score
7,482
Location
Downingtown, PA
First Name
Wayne
Truck Year
1974
Truck Model
Jimmy
Engine Size
350
No experience with oil pan heaters. I would recommend a tank type coolant heater.

Zero Start is a good brand:

You must be registered for see images attach


CLICK HERE
 

Normmus

Full Access Member
Joined
Dec 20, 2022
Posts
66
Reaction score
157
Location
Saskatchewan
First Name
Norm
Truck Year
1977
Truck Model
K10
Engine Size
350
In my experience the magnetic oil pan heaters are not as effective as coolant heaters, but are better than no heater at all.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,804
Reaction score
9,652
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Now think about this. If you put a magnetic heater on the oil pan you will have 5 quarts if warm oil in the bottom of the pan. The block above it and the intake manifold,radiator,everything is still stone cold and trying to be warmed by 5 quarts of warm oil. If you use a freeze plug heater,radiator hose heater etc. Your heater core will be warm,the block will be warm,the radiator will be warm,lots more bang for your buck warming the 4 gallons of coolant. Warm coolant that sounds strange doesn't it.
 
Last edited:

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,957
Reaction score
5,872
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
A $30 block heater has never done me wrong. Never replaced one either. Starts obviously way easier, gets heat in it wayyy faster. -20F last night windchill was about -50F. We've had a cold snap for a few days here lol.

I do run a small chunk of cardboard on the rad below single digits though. Usually get lazy and don't take it off until +30's, the truck doesn't care, it maintains temp just fine. Ive done it on new trucks too. Helps with warmup and keeping temp up, especially with winds and higher speed driving. White trash grille winter cover lol, at least it's not ugly and expensive as hell :anitoof:
 

Forum statistics

Threads
44,651
Posts
963,844
Members
37,242
Latest member
Johnmartin99
Top