Lift options and recommendations for a 1980 Jimmy

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Zelph

Full Access Member
Joined
Dec 10, 2022
Posts
119
Reaction score
204
Location
Nevada
First Name
David
Truck Year
1989
Truck Model
K5
Engine Size
350 TBI
Link it. Have all the flex and a better ride than any leaf spring could provide.
 

Russtypickle

Junior Member
Joined
Mar 9, 2024
Posts
4
Reaction score
24
Location
Vancouver Island
First Name
Russell
Truck Year
1985
Truck Model
Blazer
Engine Size
350
Not sure if everyone will agree here but I have a 6" lift in my '85 (IBPO) and I hated the way it looked. Although it rode level it always looked like the front end was
higher because of the height difference between the body line and wheel arches. I took it to a local spring shop and had the front lowered about 2" and moved the axle forward a little. Looks way better in my opinion not to mention it softened the ride as the lift put my front rear shackles at an angle that wouldn't let them flex. I run 35's on it and they do rub at full lock so I might get the axle moved forward a little in the new year as its really not that bad for most daily driving. I don't wheel it.
You must be registered for see images attach
You must be registered for see images attach
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,077
Reaction score
12,442
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Not sure if everyone will agree here but I have a 6" lift in my '85 (IBPO) and I hated the way it looked. Although it rode level it always looked like the front end was
higher because of the height difference between the body line and wheel arches. I took it to a local spring shop and had the front lowered about 2" and moved the axle forward a little. Looks way better in my opinion not to mention it softened the ride as the lift put my front rear shackles at an angle that wouldn't let them flex. I run 35's on it and they do rub at full lock so I might get the axle moved forward a little in the new year as its really not that bad for most daily driving. I don't wheel it.
You must be registered for see images attach
You must be registered for see images attach
How much is the axle moved forward. It’s not even noticeable.
I need to do that as well. Even w 5” of lift it is tight with the 35s and wheel offset. Just haven’t but I slapped in zero rates to get it up a little.
Once I move the sway bar and get the driveshaft lengthened I can shift it forward.
 

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
3,121
Reaction score
5,834
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
Not sure if everyone will agree here but I have a 6" lift in my '85 (IBPO) and I hated the way it looked. Although it rode level it always looked like the front end was
higher because of the height difference between the body line and wheel arches. I took it to a local spring shop and had the front lowered about 2" and moved the axle forward a little. Looks way better in my opinion not to mention it softened the ride as the lift put my front rear shackles at an angle that wouldn't let them flex. I run 35's on it and they do rub at full lock so I might get the axle moved forward a little in the new year as its really not that bad for most daily driving. I don't wheel it.
You must be registered for see images attach
You must be registered for see images attach
That looks way better. A little rake is the best look in my book.
 

Forum statistics

Threads
44,391
Posts
956,275
Members
36,682
Latest member
fielddad
Top