leaf spring bushings

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

79Scott

Full Access Member
Joined
Apr 19, 2015
Posts
130
Reaction score
50
Location
N37°20’26” - W77°40’34
First Name
Scott
Truck Year
86
Truck Model
C10-Silverado
Engine Size
305ci
Hey guys,
Please excuse my ignorance but what is a rear forward spring bushing in regards to rear leaf springs?

I assume the front bushings are different than the rears on the leaf springs?

Thanks
 

TubeTruck

I'm from Boston. Deal with it.
Joined
Sep 4, 2019
Posts
1,439
Reaction score
2,180
Location
East TN
First Name
Denis
Truck Year
1978
Truck Model
Suburban K10
Engine Size
LQ9
The front of the rear spring, the solid mount side.
 

Swearbody

Full Access Member
Joined
Nov 4, 2018
Posts
701
Reaction score
716
Location
Birmingham AL
First Name
Jeff
Truck Year
84
Truck Model
C1500
Engine Size
355 sbc
It is in fact the bushing that resides in the front eye of the spring.

You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

Swearbody

Full Access Member
Joined
Nov 4, 2018
Posts
701
Reaction score
716
Location
Birmingham AL
First Name
Jeff
Truck Year
84
Truck Model
C1500
Engine Size
355 sbc
And yes the front is a little smaller than the rear if I recall correctly.
 

79Scott

Full Access Member
Joined
Apr 19, 2015
Posts
130
Reaction score
50
Location
N37°20’26” - W77°40’34
First Name
Scott
Truck Year
86
Truck Model
C10-Silverado
Engine Size
305ci
So I would need two sets of bushings, one set for the front of the springs and one set for the rear of the springs?
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,303
Reaction score
2,272
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
One end of the spring uses a fixed mount, so it has a single bushing to allow it to rotate in the mount. The other end of the spring must be allowed to change in length as the axle moves, so it has a shackle mount with a bushing in each end. On a 4WD squarebody there is a total of 12 bushings (3 per spring). They are not all the same diameter.

Bruce
 

Forum statistics

Threads
44,401
Posts
956,720
Members
36,711
Latest member
MTsquare
Top