Lack of power

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Charlief

Junior Member
Joined
Oct 29, 2020
Posts
8
Reaction score
4
Location
Constantine, Mi.
First Name
Charlie
Truck Year
1977 1987
Truck Model
C20 Camper Special R10 short bed
Engine Size
454 350
I'm new here so bear with me. I have a 1977 C20 Camper Special 454/400 3.21 rear. it has 2K over 100K on it. We have a 28' camper we tow with it. On flat ground it pulls no problem but going up hills it lacks power . At the bottom of the hill I could be doing 65 but at the top maybe 35. I know this engine is no power house but I'd think it would pull better. If I change to an RV cam would that be enough? Any other thoughts Thanks.
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,753
Reaction score
18,201
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
I'd look at the timing advance before I'd throw money at it.
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
7,270
Reaction score
15,874
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
If it really has 3.21 gears in it, the first thing I would look at doing would probably be a lower gear??
 

Charlief

Junior Member
Joined
Oct 29, 2020
Posts
8
Reaction score
4
Location
Constantine, Mi.
First Name
Charlie
Truck Year
1977 1987
Truck Model
C20 Camper Special R10 short bed
Engine Size
454 350
according to the build sheet it is a 3.21 I was thinking of a 4/11 or 4/10
 

GXPWeasel

Full Access Member
Joined
Nov 5, 2019
Posts
589
Reaction score
1,105
Location
Kansas
First Name
Greg
Truck Year
1982 | 2015
Truck Model
Sierra C15 | Silverado Z71
Engine Size
5.0 | 5.3
Wow, you definitely need to change something. I pull a 29 foot camper with my half ton (2015 Silverado) and I have no problem pulling the damn thing 80mph if I want. I just don't have the suspension for me to want to pull farther than about 2 hours drive from home. And let me be clear, I don't pull that fast. I just have gotten up to that speed before when I wasn't paying attention. Usually keep her around 65 for safety sake.

I agree an old 454 probably has the same wheel hp as a modern 5.3, so you shouldn't be having those issues. Check your actual gearing, and if it really is that high, I'd change to something lower for sure.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,581
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
New from the factory in 77, that 454 only had 245hp and 365ft-lb of torque. Those 3.21's were the standard gear ratio for a 454 C20 in that year. A good RV cam, free flowing exhaust, and better gearing would make a world of difference. Biggest benefit would probably be the gearing though. Should be very easy to find a 4.10 geared 14 bolt FF floating around for $300 or less.

You can find the factory vehicle info kit on your year truck here:
https://www.gmheritagecenter.com/do...its/Chevrolet-Trucks/1977-Chevrolet-Truck.pdf

Wow, you definitely need to change something. I pull a 29 foot camper with my half ton (2015 Silverado) and I have no problem pulling the damn thing 80mph if I want. I just don't have the suspension for me to want to pull farther than about 2 hours drive from home. And let me be clear, I don't pull that fast. I just have gotten up to that speed before when I wasn't paying attention. Usually keep her around 65 for safety sake.

I agree an old 454 probably has the same wheel hp as a modern 5.3, so you shouldn't be having those issues. Check your actual gearing, and if it really is that high, I'd change to something lower for sure.

A 2015 Silverado not only has better gearing, it also makes WAY more power and has a 6-speed trans that keeps the engine right in the best powerband. Factory rated power on the 2015 5.3 is 355hp and 383lb-ft, and it isn't 50 years old. Our 2011 Suburban slows down quite a bit going up hills when towing and it has 3.21's. I'll be changing the gears out for 4.10's soon and am expecting it to help quite a bit.
 

potent rodent

Full Access Member
Joined
Mar 22, 2020
Posts
195
Reaction score
112
Location
indiana
First Name
butch
Truck Year
86 and 78
Truck Model
1500
Engine Size
350 and 305
first thing i would do is check fuel filter, make sure timing is set, could be a little of both
 

Latest posts

Forum statistics

Threads
44,168
Posts
950,787
Members
36,284
Latest member
RogerioHR
Top