just bought a '87 Silverado V10 - needs tires -

[Jwernatl]

Hey all I've got stock, all original - CHEVY SILVERADO V10 I just picked up yesterday. It needs tires. Anyone know - what the biggest tire I can fit on this?

Using the stock wheels?

And do you have a pic?

I'll be updating the shocks - but wanted to keep it stock height for now.

You must be registered for see images attach

I'll be changing out the heater core tomorrow -

 

[jjester6000]

Hey all I've got stock, all original - CHEVY SILVERADO V10 I just picked up yesterday. It needs tires. Anyone know - what the biggest tire I can fit on this?

Using the stock wheels?

And do you have a pic?

I'll be updating the shocks - but wanted to keep it stock height for now.

You must be registered for see images attach

I'll be changing out the heater core tomorrow -

You must be registered for see images attach

I have some 31x10.5x15s on my '74 C1500, but I've heard of people putting up to 33's with out any rubbing. With 35's, that's where you start trimming the corners of the fenders.

Nice truck by the way.

 

[FireTruck1984]

You must be registered for see images attach

You must be registered for see images attach

Hey all I've got stock, all original - CHEVY SILVERADO V10 I just picked up yesterday. It needs tires. Anyone know - what the biggest tire I can fit on this?

Using the stock wheels?

And do you have a pic?

I'll be updating the shocks - but wanted to keep it stock height for now.

You must be registered for see images attach

I'll be changing out the heater core tomorrow -

15x 8 wheels. 33. 10.5

You must be registered for see images attach

 

[Poppy 87]

Welcome from coastal Georgia!! Nice truck!

 

[Usmczo6]

Great looking ride!

 

[78C10BigTen]

Great truck!!!

 

[RoryH19]

Welcome from TX.
Looks like you have 31x10.5 on the 15x8 rally wheels.

Looks good to me the way it sits. My 78 k10 has the same setup.

 

[dvdswan]

Welcome to the site. Super clean truck.

 

[45tt]

32x11.50x15, all stock suspension-no lift and no rubbing even with the running boards

You must be registered for see images attach

 

[Shorty81]

Welcome from the Buckeye State. Nice Chevrolet.

 

[bucket]

32x11.50x15, all stock suspension-no lift and no rubbing even with the running boards

You must be registered for see images attach

That's the route I would go, personally.

My K5 has 33x12.5's on 8.5" wide wheels and the front fenders needed trimmed. When I eventually install new fenders, I'll either lift it 2.5" or run 32's.

 

[Matt Frediani]

Just lifted my GMC V2500 2" front 1.5" in the rear. I purchased new wheel vintiques stock looking 16x8" wheels. What is the best tire size? I am thinking 285/75/16 is this too wide of a tire? I dont want ballon tires. I want it to look aggressive but nothing too crazy? I have 255/75/16 on my 4" lifted 71. Im torn on what size to put on my square body. Pictures below is of my Square needing tires and my 71 with the 255' tires

You must be registered for see images attach

You must be registered for see images attach

 

[NCBurb]

I had 285s (about 33 x 11.5) on mine when I got it, and they did rub at full turn. Fortunately they were all worn out so I went with a narrower 33 x 10 and I love them so far. no pics yet, just got them.

 

[Jwernatl]

hmm. here's a tire comparison - it's pretty neat. it kinda gives you a visual on one size vs another.

https://www.tacomaworld.com/tirecalc?tires=255-75r16-265-75r16

 

[Grit dog]

8” wide wheel is the prefect width for 285s.
That combo would work good from all aspects.


So you now have 2 kick ass totally awesome trucks! What else are you hiding? Lol