Is the "body shop" tryna rob me

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

climb-101

Full Access Member
Joined
Mar 12, 2018
Posts
262
Reaction score
278
Location
montana
First Name
seth
Truck Year
974
Truck Model
c2 crew cab
Engine Size
6.0 LS
$7k. isn’t too out of line for paint. i just got a ‘78 crewcab painted for the second time ( long story but the paint shop ended up paying for the second paint job because of some bad product. by the time the truck was painted at the body shop it was $20k.

i already had all the metal work done. I fixed the little bit of rusty, pulled the dents and metal finished everything so there was minimal filler in the truck. By the time that was done and everything was skim coated, sanded, primed and blocked 3 times, i was in it roughly 300 hours.

That 300 hours didn’t include any of the other frame mods i did (swaped to a chevy frame). lots of the expense in building a truck is time. materials do add up though. $2k might get just the primer and paint for a truck.

if you figure they have $5k for labor and they have charge $100/hours they figuring they’re only going to be in it 50 hours and that’s not much time at all.

I would do some looking around on youtube and watch some videos. there is tons of great info and videos showing how to do things. you can save your self a lot of money. welding is easy with a little bit of practice. getting things straight isn’t hard, just use a measuring tape. same goes for body work.

here’s is a pic of the truck i was talking about. it’s a ‘78 ford on a 2000 suburban chassis that i had to lengthen about 7”. It’s got 35” tires and has a 5.3/4l60 trans and has the chevy interior in it.

You must be registered for see images attach
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
10,041
Reaction score
10,134
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
Dude.

So I just found this thread and started reading.
Wtf 2 pages already?!

My second thought is the same as the first:

Don't do it.

Not now, not that truck.

SEVEN THOUSAND DOLLARS will buy a MUCH NICER truck with MANY MORE qualities that you want.

Seven grand will buy a fast,shiny,shortbed,4x4, if that's what you want.

There is absolutely ZERO reason to spend that kind of money on THAT truck, NOW.

Listen to me dude - it's not worth it.
You are asking us /me to tell you it's okay to make that REALLY BAD investment and i'm not gonna do it.
:nono:
 

73c20jim

Full Access Member
Joined
Jun 11, 2018
Posts
2,282
Reaction score
2,926
Location
Tombstone, AZ
First Name
Jim
Truck Year
1973, 1973
Truck Model
C20 2WD Custom Deluxe. C10 2WD Base Model
Engine Size
350 CID 195/260 HP Goodwrench crate, 400 CID 2bbl
Coming in late, I see two options.

1. Put the truck together mechanically sound, drive it and do the bodywork as you go along.

2. Sell it and get another truck that is sound body wise, then do the mechanical work.
 

82sbshortbed

Fuckemall!!
Joined
Mar 1, 2018
Posts
15,828
Reaction score
53,159
Location
SE Texas
First Name
Doug
Truck Year
1982, 1984
Truck Model
1500 shortbed, 1500 longbed
Engine Size
454, 305
It sounds like you have it mechanically sound if I've read this right. I have to agree with rusty and don't put 7k in body work in it. But, maybe you could find a high school near you that has a vocational body shop class in it. You said you just need a decent paint job on it. I took 3 years of body shop in high school. That doesn't mean I'm a badass body man by no means. But I can tell you this. I fixed my dad's 84 suburban pass door dent. He just had to buy the paint. He was pleased and you couldn't tell it had been fixed. I painted my buddy's 85 camaro. He just had to buy paint. Did body work and primered my 71 chevelle. Painted my IROC-Z rims for price of the paint. What I'm saying is that if you have sentimental value in the truck? This would allow you to keep the truck and not have to sink a ton of money into it and let some kids learn a trade skill. I know we were always looking for cars to work on back then. They'll do a good enough job for you that will save you a ton of money. Just an idea if you wanted to hold on to that truck for sentimental reasons. You could even take 1k out of your 7 to buy a decent little daily while your truck's in the shop and still be ahead.
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,218
Reaction score
12,015
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
It's pretty much been covered to death, but I paid about $7K to have my Suburban stripped, body repair done, (the only rust was bolt on panels and doors) painted and reassembled.

When I had the pickup painted I got smarter and delivered the truck completely free of trim and about everything else. It didn't need doors replaced, and they didn't media blast it, but it "only" cost me $3K to have body work and paint done. Labor is EXPENSIVE.
 

deve05

Full Access Member
Joined
Dec 28, 2017
Posts
160
Reaction score
50
Location
US
First Name
Diego
Truck Year
1984
Truck Model
c10
Engine Size
305 C.I.
It sounds like you have it mechanically sound if I've read this right. I have to agree with rusty and don't put 7k in body work in it. But, maybe you could find a high school near you that has a vocational body shop class in it. You said you just need a decent paint job on it. I took 3 years of body shop in high school. That doesn't mean I'm a badass body man by no means. But I can tell you this. I fixed my dad's 84 suburban pass door dent. He just had to buy the paint. He was pleased and you couldn't tell it had been fixed. I painted my buddy's 85 camaro. He just had to buy paint. Did body work and primered my 71 chevelle. Painted my IROC-Z rims for price of the paint. What I'm saying is that if you have sentimental value in the truck? This would allow you to keep the truck and not have to sink a ton of money into it and let some kids learn a trade skill. I know we were always looking for cars to work on back then. They'll do a good enough job for you that will save you a ton of money. Just an idea if you wanted to hold on to that truck for sentimental reasons. You could even take 1k out of your 7 to buy a decent little daily while your truck's in the shop and still be ahead.
That sir, is actually not a bad idea at all. Hmm... Im definitely gonna look into that.

Sent from my Moto Z (2) using Tapatalk
 

deve05

Full Access Member
Joined
Dec 28, 2017
Posts
160
Reaction score
50
Location
US
First Name
Diego
Truck Year
1984
Truck Model
c10
Engine Size
305 C.I.
Coming in late, I see two options.

1. Put the truck together mechanically sound, drive it and do the bodywork as you go along.

2. Sell it and get another truck that is sound body wise, then do the mechanical work.
Yeah I'd be more inclined to selling it and buying a truck that's fine in the body area and needs just the mechanical.

Sent from my Moto Z (2) using Tapatalk
 

4WDKC

Full Access Member
Joined
Jan 27, 2016
Posts
2,366
Reaction score
1,090
Location
Southern Florida
First Name
Kacy
Truck Year
1987
Truck Model
V10
Engine Size
350
Does this $7K include paint or not?

The thing with rust repair and body work is you never know how much you are going into until its to late and the options are fix it or scrap it. 7K to remove all the rust, install new panels, hack apart a frame,section it, c notch it is all alot of work and time consuming so if he is doing this after a normal job youre looking at alot of his time to complete it all. Im not familiar with Florida laws yet but, if he is responsible for the work done and the section welds break and cause an accident he might be liable for everything..It also could be he threw a high quote because he doesnt want to do it. I know of a body shop that charged someone 14K for body work and paint (no rust repair) on a 57 Bel Aire.

Another option since you can do the install labor but not body work is find a rust free cab and swap them.
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,092
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
Convert your sentiments on that truck to square bodies in general... that will free you up to make more sound choices like... a different truck closer to what you want.

The body man that gave you the quote is obviously smart and experienced... he didn't get to where he is (well maybe he did but certainly changed his ways)
by underbidding jobs.
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,751
Reaction score
18,198
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
I was actually very specific with the guy. I told him that I would take the truck apart for him, that id leave it in the metal for him, and would even remove the fenders and pull the cab from the frame. I told him I would buy the cab repair kit and I just needed him to cut and weld in the repair kit and give the truck a decent paint job. I told him I was planning on driving ithard once it was done so not to bother with any show like quality or mirror looking paint job.

I told him he didn't have to put it back together either since I would do all of that.

I told him I just needed him to cut the frame and weld it together on certain marks I was going to make for him.

I dont see how I coulda been more specific... Honestly...

Sent from my Moto Z (2) using Tapatalk

And he told you $7K?

I wouldn't. But, it's your truck and your money and in the end you're the one that has to be satisfied with it.
 

Latest posts

Forum statistics

Threads
44,166
Posts
950,716
Members
36,282
Latest member
Doug Hampton
Top