I’m in love - here’s the truck I’m dating

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,192
Reaction score
8,030
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
Welcome. Here we go...
 

Attachments

  • Here we go....JPG
    Here we go....JPG
    34.9 KB · Views: 64

85K304SPD

Full Access Member
Joined
Mar 29, 2022
Posts
472
Reaction score
702
Location
Las Cruces, NM
First Name
Richard
Truck Year
1985
Truck Model
K30
Engine Size
402
Nice truck. Don't be worried about working on it. Just make a plan and get it done. Man built it, so man can fix it.
It wont take much to freshen it up. Do the standard stuff, plugs, wires, cap & rotor, belts. Oil change, trans service, check the diff. Maybe u joints. Grease up the suspension. Check the brakes. Basic maintainence stuff, and you will think it is a whole new truck, for not much money.
 

Royal Sierra 454

Full Access Member
Joined
Feb 3, 2022
Posts
268
Reaction score
654
Location
Goodyear, AZ.
First Name
Scott
Truck Year
1976
Truck Model
15 GMC Royal Sierra
Engine Size
454
LMC has a exhaust system. I think Holley also might have a system?
 

Ontheboulder

Full Access Member
Joined
Feb 27, 2022
Posts
310
Reaction score
366
Location
colville,wa
First Name
greg
Truck Year
1987
Truck Model
gmc sierra classic v2500
Engine Size
350
I gave 2400 for my 87 GMC Sierra classic 4x4 V2500,with no rustor major issues, it had a few gremlins-fuel pumps,turn signal switch and good glass. I think 3500 would be about 1500 too much. washington truck here as well.
 

CheemsK1500

Full Access Member
Joined
Jun 3, 2022
Posts
831
Reaction score
1,471
Location
Texas
First Name
Paul
Truck Year
1984
Truck Model
K1500
Engine Size
305
For me I want the interior to feel clean, regardless if I will be using it to haul stuff, I still like my cars to be really clean. The door panels are starting to disintegrate and the steering wheel is sticky. So replacing the things that are legit failing will be the goal, not to make it all shiny new. I like the way it smells too much lol
I'm glad you like the way it smells, I've been fighting a lingering stench in my '84 K1500. It sat abandoned for a good seven years before I bought it though; but yet it is still somehow cleaner on the inside than a lot of newer cars people drive everyday.
 

CheemsK1500

Full Access Member
Joined
Jun 3, 2022
Posts
831
Reaction score
1,471
Location
Texas
First Name
Paul
Truck Year
1984
Truck Model
K1500
Engine Size
305
I gave 2400 for my 87 GMC Sierra classic 4x4 V2500,with no rustor major issues, it had a few gremlins-fuel pumps,turn signal switch and good glass. I think 3500 would be about 1500 too much. washington truck here as well.
You folks up there are lucky in the used car market. Where I'm at, the truck you just described would sell for $8000 or more immediately after being listed.
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,772
Reaction score
6,635
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,581
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
Oh awesome, you’ve got the mystic too! Once I get the mechanical stuff addressed I’ll be doing the interior, which I’m so excited to refresh! Thanks for the pic
I have a 1980 K25 Sierra Classic with the Gray/White Mystic interior also. The only place I have ever seen sell the Mystic interior panels is USA1. I have the original set of manifolds pulled off my truck when I put the new motor with headers on last year. You are welcome to just have them if you are going to be in the Salem, Or area at some point. I would also suggest joining a local squarebody group like "PNW K5's & Squarebodies" on facebook. Lots of guys on that group are local to you and I'm sure someone has a set of manifolds sitting around that they wouldn't mind getting rid of. There's also a member on there(Jon Addington) that is a dealer for weatherstripping, specializing in early chevy stuff, and is in the Vancouver area.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,581
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
I gave 2400 for my 87 GMC Sierra classic 4x4 V2500,with no rustor major issues, it had a few gremlins-fuel pumps,turn signal switch and good glass. I think 3500 would be about 1500 too much. washington truck here as well.
This was my thought as well. $2500 isn't a bad price, but $3500 is too much. I bought mine back in 2018 or so for $850, but it wasn't running/driving since it had been parked in the backyard for about 12 years. Had they taken the time to flush the fluids and put new fuel line on it(which is all I did when I got it home), they would have had a driver to sell and likely could have gotten 2k or so for it. The prices have really gone up on a lot of this stuff, but in the PNW it's probably the lowest resale value square you can have to be a C25 pickup. Theres just a way bigger market for Blazers/Suburbans and 4x4 trucks up here and they made more of the C20's than just about any other one it seems.
 

tophat36

Full Access Member
Joined
Aug 5, 2022
Posts
93
Reaction score
112
Location
Bremerton, WA
First Name
Jessica
Truck Year
1980
Truck Model
C2500
Engine Size
350-4 V8
This was my thought as well. $2500 isn't a bad price, but $3500 is too much. I bought mine back in 2018 or so for $850, but it wasn't running/driving since it had been parked in the backyard for about 12 years. Had they taken the time to flush the fluids and put new fuel line on it(which is all I did when I got it home), they would have had a driver to sell and likely could have gotten 2k or so for it. The prices have really gone up on a lot of this stuff, but in the PNW it's probably the lowest resale value square you can have to be a C25 pickup. Theres just a way bigger market for Blazers/Suburbans and 4x4 trucks up here and they made more of the C20's than just about any other one it seems.
Sadly it’s a much different used car market than it was even 4 years ago, add inflation and gas prices to that…I think $2500 is completely reasonable. No need for 4wd here, I’m from colorado where it actually made sense b/c of the snow. What a lot of people seem to be into w trucks/cars just isn’t my thing…I’ll never understand the dropped shortbeds with the huge rims and I’m not a suburban/blazer fan…rode in too many on the way to soccer practice as a kid. Now maybe an OJ Simpson Eddie Bauer Bronco I could get behind!
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,581
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
Sadly it’s a much different used car market than it was even 4 years ago, add inflation and gas prices to that…I think $2500 is completely reasonable. No need for 4wd here, I’m from colorado where it actually made sense b/c of the snow. What a lot of people seem to be into w trucks/cars just isn’t my thing…I’ll never understand the dropped shortbeds with the huge rims and I’m not a suburban/blazer fan…rode in too many on the way to soccer practice as a kid. Now maybe an OJ Simpson Eddie Bauer Bronco I could get behind!
Agreed, although the 4wd makes just as much sense here as it does in Colorado if you head up into the cascades at all, which I do. If nothing else, it lets me not need to put chains on just to go over the pass, since I have 4wd and mountain snowflake rated tires. I've also had to use my 4wd more than once to get into some of the hunting camp spots with my trailer. While I probably wouldn't need it to get there without the trailer behind it, the extra weight makes it impossible to get up some of these hills without putting it into 4lo.

If you are staying mostly around town and on major roads, there is definitely no need for 4wd around here though. Either way, I think you got a great truck for a good price. Looking forward to seeing what you do with it.
 

BRetty

Full Access Member
Joined
Jul 16, 2020
Posts
928
Reaction score
2,618
Location
Los Angeles
First Name
Franklin
Truck Year
1973
Truck Model
c10
Engine Size
350
Get it! Get it! Do whatever it takes. Look at that big bench seat, just Ready for Love! Is that a CB radio?? Charcoal, and it *IS* a longbed, right?

You can live in this truck. You should. It will treat you better than any woman ever has.

She is singing to you...I expect it goes something like this:

xc_hide_links_from_guests_guests_error_hide_media
 

Kurnacopia

Full Access Member
Joined
Jan 19, 2021
Posts
259
Reaction score
268
Location
Tucson, AZ
First Name
Mike
Truck Year
1978
Truck Model
Scottsdale
Engine Size
383
Welcome from AZ! Purchase that guy!!!
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,322
Reaction score
10,214
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker

oldretiredafguy

Full Access Member
Joined
Apr 20, 2020
Posts
1,419
Reaction score
3,235
Location
N. Texas
First Name
Mike
Truck Year
1988, 1988, 1991, 1983
Truck Model
GMC V-Jimmy, GMC Suburban 4WD, GMC Suburban 4WD, GMC-2500 CrewCab
Engine Size
350, 350, 350, 350
Get it! Get it! Do whatever it takes. Look at that big bench seat, just Ready for Love! Is that a CB radio?? Charcoal, and it *IS* a longbed, right?

You can live in this truck. You should. It will treat you better than any woman ever has.

She is singing to you...I expect it goes something like this:

xc_hide_links_from_guests_guests_error_hide_media
I just watched this video. Wow, she is sex on a stick. Had to make sure my wife wasn't looking over my shoulder, so I didn't get a bop to the head!

Now, any update on the truck purchase?
 

Latest posts

Forum statistics

Threads
44,163
Posts
950,650
Members
36,276
Latest member
2manysquares2care
Top