How often should the a/c cycle while cruising? (Other vehicles)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,538
Reaction score
4,584
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
On a jeep liberty 3.7l v6.
The compressor stays on pretty good while sitting and idling. Just replaced bad electric fan. While cruising the compressor cycles on and off pretty frequently. I added a little and still did it but seemed to delay the start of the frequent cycling. Any thoughts on if it should for the most part stay on while cruising. Roughly 1500 rpm.
 

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,538
Reaction score
4,584
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Added this light to watch while driving. Comes on with the compressor.
 

Attachments

  • 20240608_133209.jpg
    20240608_133209.jpg
    125.5 KB · Views: 28
  • 20240608_133137.jpg
    20240608_133137.jpg
    121.4 KB · Views: 29

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,938
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
This is general information not specific to a Liberty.

Clutch cycles to prevent condenser freeze up and if refrigerant is low protect the compressor. In order to diagnose it correctly system will need the correct charge. 134A is very sensitive to either over or under charge. After doing that will need data for system pressure and correct pressure values.

Could be incorrect charge, an internal restriction or bad cycling switch if indeed there is anything wrong. We have seen many cases where cars come in after the owner added a can or 2 of 134A. All we have to do to many of those vehicles is discharge and add correct volume. 134A systems do not require near as much refrigerant as the old R12.
 

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,538
Reaction score
4,584
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
This is general information not specific to a Liberty.

Clutch cycles to prevent condenser freeze up and if refrigerant is low protect the compressor. In order to diagnose it correctly system will need the correct charge. 134A is very sensitive to either over or under charge. After doing that will need data for system pressure and correct pressure values.

Could be incorrect charge, an internal restriction or bad cycling switch if indeed there is anything wrong. We have seen many cases where cars come in after the owner added a can or 2 of 134A. All we have to do to many of those vehicles is discharge and add correct volume. 134A systems do not require near as much refrigerant as the old R12.
Thank you fast 99, I added a gauge on the hood to go with the light and was able to test drive while watching both. I watched it and adjusted it to a good acceptable level and it stayed around 55ish# fluctuating up and down 5-10# depending on what speed and work the engine had to do.
did some on off highway in town and idling in parking on side of the road. Stopped at a lemonade stand lol and seemed to do really good.
My biggest question is how much pressure isdangerous for the low side.
 

Attachments

  • 20240608_151823.jpg
    20240608_151823.jpg
    106.7 KB · Views: 26

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,938
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
My biggest question is how much pressure isdangerous for the low side.

Varies

55 lbs sound a little on the high side, overcharge?

You must be registered for see images attach
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,938
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Air flow and ambient temps, have a lot to do with pressures. If you want to verify that pour a little cold water on the condenser with gauges hooked up.
 

Forum statistics

Threads
44,168
Posts
950,804
Members
36,286
Latest member
goodwrenchca
Top