How Low?
- Thread starter 87hotrod
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
J Knight
Full Access Member
- Joined
- Sep 8, 2011
- Posts
- 4,298
- Reaction score
- 141
- Location
- Baytown TX
- First Name
- John
- Truck Year
- 82 Chevy
- Truck Model
- C10
- Engine Size
- 350ci
2-3in on the front, no limit on the rear.
smoothandlow84
I'd rather be draggin' frame
- Joined
- Jan 4, 2015
- Posts
- 2,121
- Reaction score
- 790
- Location
- Arizona
- First Name
- Steve
- Truck Year
- 1984 Frame...87 motor and 700r trans
- Truck Model
- 1500 r10 pavement scraper
- Engine Size
- 350 TBI
I have a 5/7 drop, but had to modify the inner fenderwells. I went with 20" rims and a 45 series tire...ends up being the same tire height as the stock 29" tall tire setup with the 15" rims.
SHILOW
Junior Member
- Joined
- Jun 28, 2013
- Posts
- 17
- Reaction score
- 1
- Location
- HOUSTON
- First Name
- D
- Truck Year
- 86
- Truck Model
- C10
- Engine Size
- 350
86' 235/75/15 Rally's with 25mm spacers
5/7 McGaughy drop
front: includes 3" sipndles and 2" lowering spings
rub on inner fender
rub on lower control arm
roll fenders
rear: flip kit and additional 2" lowering shackles
roll fenders, no rub
5/7 McGaughy drop
front: includes 3" sipndles and 2" lowering spings
rub on inner fender
rub on lower control arm
roll fenders
rear: flip kit and additional 2" lowering shackles
roll fenders, no rub
You must be registered for see images attach
smoothandlow84
I'd rather be draggin' frame
- Joined
- Jan 4, 2015
- Posts
- 2,121
- Reaction score
- 790
- Location
- Arizona
- First Name
- Steve
- Truck Year
- 1984 Frame...87 motor and 700r trans
- Truck Model
- 1500 r10 pavement scraper
- Engine Size
- 350 TBI
5/7 drop
5/7 drop 2" spindle with 3 inch lowering coils, 2"drop shackles, axle flip kit and mini c notch. No rubbing out back tucking 10" wide 20" wheels, removed front fenderwells.
This pic is before the recent bodywork and new primer application.
5/7 drop 2" spindle with 3 inch lowering coils, 2"drop shackles, axle flip kit and mini c notch. No rubbing out back tucking 10" wide 20" wheels, removed front fenderwells.
This pic is before the recent bodywork and new primer application.
Last edited:
