Help me ID these seats

[Trucksareforwork]

Hey guys. I have these bucket seats for an older c10 (66) build I’m contemplating, and am wondering if ya’ll could help me identify what they are off of.

I figure the track type might ring a bell for someone. They look pretty distinct with the rolled edges of the tracks and mounts. Any help? It would help me figure out upholstery and fit if I can figure out where they came from. Prior owner threw them in with the deal.

 

[bucket]

Is that both of them, or just one? If it's both, they are both driverside seats for an '88-'91 gmt400 extended cab truck. The passenger side seat was wider (40/60 type).

 

[Trucksareforwork]

It’s just one. I did a 360 around it. I should have said “seat” in the title. I have both, photographed one. But they are the same size, so you raise a good question.

 

[dvdswan]

They grabbed two driver seats to make buckets if they are both the same.

You must be registered for see images attach

 

[AyWoSch Motors]

Hey guys. I have these bucket seats for an older c10 (66) build I’m contemplating, and am wondering if ya’ll could help me identify what they are off of.

I figure the track type might ring a bell for someone. They look pretty distinct with the rolled edges of the tracks and mounts. Any help? It would help me figure out upholstery and fit if I can figure out where they came from. Prior owner threw them in with the deal.

'88-'91 GMT 400 extended cab drivers side.

 

[AyWoSch Motors]

Is that both of them, or just one? If it's both, they are both driverside seats for an '88-'91 gmt400 extended cab truck. The passenger side seat was wider (40/60 type).

Oops, didnt see your message.
You got it.

 

[Trucksareforwork]

Ok. Here’s a photo of the two of them together. Left one is the original photo seat. Does that mean that I have two driver side seats? I had assumed they were off something that had a center console.



Thanks for the guidance.

 

[AyWoSch Motors]

Ok. Here’s a photo of the two of them together. Left one is the original photo seat. Does that mean that I have two driver side seats? I had assumed they were off something that had a center console.



Thanks for the guidance.

I suppose it could've been out of a 88-91 truck with a console. But most ibe seen with that seat had the 40-60 bench style.
Are there still female side seat beat buckles on them? If there both drivers, they should both have a buckle on the left side, or you should be able to see where one used to be. If not, maybe its factory.
Your mount brackets are offset opposite of each other.

 

[Trucksareforwork]

No seat belt buckles and no latches on the seat backs (they just flop). Not sure what direction I will go with them. I will have to see how they fit in the truck.

I appreciate the help identifying these.

 

[dvdswan]

I would say two dr. seats based on the seat adjuster lever for sliding forward/back.

 

[bucket]

Actually, I do believe it is a left and right seat. Notice they are offset opposite of each other on the mounts.

Come to think of it, now I remember a guy I know had a '91 extended cab with low back buckets and a floor console.