gas tank wont fill all the way

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mjck5

Junior Member
Joined
Mar 16, 2024
Posts
23
Reaction score
14
Location
wisconsin
First Name
mark
Truck Year
1986 k5 blazer
Truck Model
k5
Engine Size
400
i have a 86 k5, years ago when it was my daily driver i never had issues filling up the tank, now its back on the road after several years and when i fill it up it will only fill up about 3/4 of the tank before the nozzle shuts off, if i have the gas filling at full blast it will shut off a little after a half tank, i can hear it gurgling and if i wait a little bit i can get more gas in if i just barely pull the trigger then it will fill all the way to the gas cap and when i stop i can hear it gurgling again and it will slowly go down, if i do this over and over i can get it pretty much full but it takes forever, i pulled the rubber line off the vent line and as far as i can tell it doesn't seem to be plugged, anyone have any ideas what the issue may be?
 

Attachments

  • blazerpic.jpg
    blazerpic.jpg
    233.8 KB · Views: 6

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,955
Reaction score
12,193
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Depends on the pump nozzle type. I despise the newer vapor recovery styles. But all you can get up here. Some of them make such a good seal I can only get a couple gallons in before it spits back. Have to wedge it at an angle to fill.
If this is happening with an old school pump nozzle then I’d be thinking collapsed or linked filler hose or ???
Because shouldn’t need the tank vent if the nozzle isn’t sealing tight to the fuel filler.
God bless the Midwest. Was back there a week ago. Most every pump (I filled up 4-5x in different locations) was a good ole “farm nozzle”.
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,012
Reaction score
2,903
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Depends on the pump nozzle type. I despise the newer vapor recovery styles. But all you can get up here. Some of them make such a good seal I can only get a couple gallons in before it spits back. Have to wedge it at an angle to fill.
If this is happening with an old school pump nozzle then I’d be thinking collapsed or linked filler hose or ???
Because shouldn’t need the tank vent if the nozzle isn’t sealing tight to the fuel filler.
God bless the Midwest. Was back there a week ago. Most every pump (I filled up 4-5x in different locations) was a good ole “farm nozzle”.
And then there are those new style self-sealing fuel cans. What overpaid engineer came up with those? Hopefully some of this idiocy will be curbed soon.
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,691
Reaction score
3,718
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
i have a 86 k5, years ago when it was my daily driver i never had issues filling up the tank, now its back on the road after several years and when i fill it up it will only fill up about 3/4 of the tank before the nozzle shuts off, if i have the gas filling at full blast it will shut off a little after a half tank, i can hear it gurgling and if i wait a little bit i can get more gas in if i just barely pull the trigger then it will fill all the way to the gas cap and when i stop i can hear it gurgling again and it will slowly go down, if i do this over and over i can get it pretty much full but it takes forever, i pulled the rubber line off the vent line and as far as i can tell it doesn't seem to be plugged, anyone have any ideas what the issue may be?
Some of the K5’s that used to come through when I worked at a full service gas station we would have to insert the nozzle upside down for them to take fuel
 

Forum statistics

Threads
44,100
Posts
949,364
Members
36,196
Latest member
snickersj
Top