FS: "Working Girl" 1978 K10 RCSB Fleetside

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rich weyand

Full Access Member
Joined
May 28, 2014
Posts
967
Reaction score
177
Location
Bloomington Indiana
First Name
Rich
Truck Year
1978
Truck Model
K10
Engine Size
350
This truck has been my personal daily driver for the past seven years. Everything works, and all maintenance has been professionally done with best-quality parts. Most work was done at Extreme Performance in Bloomington, IN. Freshly detailed at Ackerman Detail Services in Bloomington, IN, including ozone treatment of the interior. Nothing to do but get in and drive. I would not hesitate to jump in this truck and drive a thousand miles or more without any attention whatsoever. She's good to go.

1978 Chevrolet Cheyenne K-10 4WD half-ton pickup,
regular cab short box, in factory monochrome black.

Recent GM 10067353 350cid crate engine, with Comp Cams 12-300-4 marine/RV camshaft, Edelbrock 1406 carburetor, Edelbrock 2601 Air-Gap Performer intake manifold, Hooker 2453 long-tube headers and 2.25" dual exhaust with H-pipe and Flowmaster 40s, thermostatic air cleaner with cold-air induction, Accel distributor cap and rotor, Accel 48000-volt coil, Taylor wires, Proform valve cover hold downs with wire clips, 94-amp 12SI alternator, Flex-o-lite electric fan and controller.

Comp Cams simulator gives 285 hp @4000, 420 ftlb @2500.

Hella E-code front headlights on headlight relay, front bumper with built-in fog lamps, Aries step bars, dual 16-gallon tanks, dual fuel gauges, tachometer, semi-custom heated leather bucket seats with center console/jump seat, floor-mounted wiper mist button, JVC Arsenal KD-AHD69 CD Receiver, Highliner headliner with four Kicker DS400 speakers, Lanzar VCTBS8 active subwoofer, three 12 VDC accessory sockets under the dash, back-up camera, Garmin GPS.

1986 bed with dual fuel doors, and 1986 fuel tanks, filler necks, and filler hoses.

Tough Country EZ-Ride Springs and Shocks, +2" front, +3" rear; Moog ball joints, Warn locking hubs, modded NP203 for 2WD option.

Rhino Liner bedliner, tonneau cover.

Recent BFGoodrich All-Terrain TA 31x10.5R15 on Cragar 15x8 steel wheels.

New since 2010, all above plus: water pump, fuel pump, power steering pump, motorized fuel tank selector valve, alternator, radiator, heater blower, windshield wiper/washer motor, cab mount bushings, master brake cylinder, four brake slave cylinders, front disc rotors and calipers, rear drums.

Body condition: generally good, but it is going to need rocker panels and two small fender corners on the medium term for best appearance.

Total chassis mileage: 164,500
Current engine mileage: 21,750
Current tires mileage: 4,300

Includes original user manual, original RPO sticker, gas/maintenance log since April 2010, manuals for all aftermarket parts, and all receipts.

Also includes NKG wideband AF/R meter, timing light, and some extra/replaced parts.

$10,000

This post contains pointers to articles describing many of the modifications done on this truck over the last seven years.
http://www.gmsquarebody.com/forum/showthread.php?t=18414

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 
Last edited:

Splandman

Full Access Member
Joined
Jan 1, 2014
Posts
265
Reaction score
61
Location
Crescent, OK
First Name
Scott
Truck Year
1982
Truck Model
K10
Engine Size
383
Just curious if you ever sold your truck. You did a great job building it. Don't think I could let it go.
 

rich weyand

Full Access Member
Joined
May 28, 2014
Posts
967
Reaction score
177
Location
Bloomington Indiana
First Name
Rich
Truck Year
1978
Truck Model
K10
Engine Size
350
Sorry for the delay. Been traveling.

Nope, haven't sold it. Couple people sniffing around, but no green yet.

I never planned to part with it, but I need the creature comforts now (health issues) and it's not fair (to karma) to let it just sit. I'm not a collector, I'm a driver.

I did enter it into a local auto show, just to get the visibility. Never thought it would also get a trophy. Maybe 150-160 vehicles there, and around 30-40 trucks.

You must be registered for see images attach
 

Splandman

Full Access Member
Joined
Jan 1, 2014
Posts
265
Reaction score
61
Location
Crescent, OK
First Name
Scott
Truck Year
1982
Truck Model
K10
Engine Size
383
You should put it on Ebay, I have sold a few on there. Sold a 1983 3/4 ton 4X4 on there a year ago or so and did pretty well. I've sold several motorcycles there too. I was really into the old KZ bikes and it's tough to get much for them locally. You do have to pay the fees but the national exposure gets you more money.

I have a lot more than $10k in mine and yours is nicer.
 

crpntr78

Full Access Member
Joined
Jan 8, 2016
Posts
537
Reaction score
434
Location
Missouri
First Name
Jerry
Truck Year
86
Truck Model
K10
Engine Size
350
Great, sounds like it went to a good home.
 

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,828
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
People are always nice when they want something or give you money.....lol congrats on the sale.
 
Last edited:

Splandman

Full Access Member
Joined
Jan 1, 2014
Posts
265
Reaction score
61
Location
Crescent, OK
First Name
Scott
Truck Year
1982
Truck Model
K10
Engine Size
383
Glad you found a buyer, wish I would have had the money.
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,389
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
I also hope they honor all the hard work you put into it.
 

Forum statistics

Threads
44,173
Posts
950,880
Members
36,291
Latest member
tannerscarber
Top