dvdswan
Full Access Member
- Joined
- Mar 11, 2014
- Posts
- 2,366
- Reaction score
- 2,038
- Location
- Port Orchard, WA
- First Name
- Dave
- Truck Year
- 1978
- Truck Model
- K10
- Engine Size
- 350
Welcome to the site.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You keep amazing me with your knowledge!Thats a 70's frame. 81+ frames have the horns cut at an angle.
My 85's frame horns
You must be registered for see images attachYou must be registered for see images attach
You must be registered for see images attach
Unless I am mistaken, isn't the actual frame manufacturing date stamped on the passenger side frame rail just ahead of the fuel tank (on the outside)? I know mine is...
The factory front springs do curve downward. Upward would indicate a lift spring. Also are you sure the springs are 3" wide? Chevy springs are 2.5" wide, later Ford springs are 3" wide. If you measured the spacing of the bracket where the spring mounts it would be 3" because of the bushing.
and from northern IL