BBCfan
Member
- Joined
- Feb 21, 2018
- Posts
- 40
- Reaction score
- 35
- Location
- Edinboro
- First Name
- Rick
- Truck Year
- 1976
- Truck Model
- C10 2WD
- Engine Size
- 454
Got my 1976 2wd 1/2 ton stripped down to the frame last fall then the weather moved in and effectively stalled the project. Been out during a warm snap we're having starting a to do list...
and I am stuck. First issue is locating good front cab mount brackets. These are riveted to the chassis. Second issue is is it possible to eliminate the vacuum assist canister as it just annoys me. About the "girl": had her since 1978 so she has no hidden history. Under the hood lives a dynoed at 500+ HP 454 with a muncie attached with a steel bell housing. A custom 2piece driveshaft twists the 12" Mickeys via a 3.90 to 1 1959(Olds?) Posi rear end. To cure wheel hop and spring wrap I built 54" ladder bars with sliders on the front end. Long winded intro..now how do I post on the other forums? I have a third issue that escapes me at the moment. Severe AAADD sufferer here. TIA, Rick.
and I am stuck. First issue is locating good front cab mount brackets. These are riveted to the chassis. Second issue is is it possible to eliminate the vacuum assist canister as it just annoys me. About the "girl": had her since 1978 so she has no hidden history. Under the hood lives a dynoed at 500+ HP 454 with a muncie attached with a steel bell housing. A custom 2piece driveshaft twists the 12" Mickeys via a 3.90 to 1 1959(Olds?) Posi rear end. To cure wheel hop and spring wrap I built 54" ladder bars with sliders on the front end. Long winded intro..now how do I post on the other forums? I have a third issue that escapes me at the moment. Severe AAADD sufferer here. TIA, Rick.
