GOBR
Full Access Member
- Joined
- Jan 24, 2012
- Posts
- 327
- Reaction score
- 2
- Location
- Memphis
- First Name
- David
- Truck Year
- 1987
- Truck Model
- R10
- Engine Size
- 355
I cut my coil springs today and when I got everything back together the brakes are actin funny. It feels almost like theres no vacuum in the booster but I know it is. The pedal goes down and gets tight like its on the floor and the truck stops slow. A couple times it stopped quick but the left rear wheel locked up. Was goin no faster than 20 mph.
The lines are not kinked underneath but were almost kinked. I unbolted them from the upper control arm and now Im gonna try to bleed them and see if they work.
Anybody else run into this problem after lowering the front end?
The lines are not kinked underneath but were almost kinked. I unbolted them from the upper control arm and now Im gonna try to bleed them and see if they work.
Anybody else run into this problem after lowering the front end?