Difference between stock air cleaner and aftermarket?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350
So I was just curious, what is the difference between stock and aftermarket air cleaner assemblies? The Edelbrock ones look a little cooler, but why does the stock one have a snorkel and the aftermarkets don't? Mine also has 2 vacuum lines and an exhaust heat riser. It also has a little tube that goes to the heads on the block. What do these things all do, and why don't the aftermarket ones have them?

Sent from my SM-G950U using Tapatalk
 

dvdswan

Full Access Member
Joined
Mar 11, 2014
Posts
2,366
Reaction score
2,038
Location
Port Orchard, WA
First Name
Dave
Truck Year
1978
Truck Model
K10
Engine Size
350
Mainly they were used for warming up the vehicle. When the vehicle was cold, the air cleaner housing and choke would work together allowing a richer mixture to the engine. As temps rose, the heat riser would open the valve that vacuum lines closed on the air cleaner allowing more air into the carb. I remember being cheap and just flip the lid on the air cleaner to allow more air into the carb. IIRC the aftermarket air cleaners would give about 3-5 more HP. When you have 165 HP to start it does help.

They would also keep down intake noise, which apparently would scare mechanically deficient people.
 

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350
Mainly they were used for warming up the vehicle. When the vehicle was cold, the air cleaner housing and choke would work together allowing a richer mixture to the engine. As temps rose, the heat riser would open the valve that vacuum lines closed on the air cleaner allowing more air into the carb. I remember being cheap and just flip the lid on the air cleaner to allow more air into the carb. IIRC the aftermarket air cleaners would give about 3-5 more HP. When you have 165 HP to start it does help.

They would also keep down intake noise, which apparently would scare mechanically deficient people.
So is it harder to cold start with an aftermarket air cleaner? If I wanted to replace the air cleaner, how do I get rid of that heat riser? Do I have to replace the headers or something?

Sent from my SM-G950U using Tapatalk
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,325
Reaction score
17,373
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
I ran an aftermarket air cleaner for years in very cold temps and had no issues with cold starts.

If you're getting rid of the stock one, I'll buy it off you.
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,428
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350
So I was just curious, what is the difference between stock and aftermarket air cleaner assemblies? The Edelbrock ones look a little cooler, but why does the stock one have a snorkel and the aftermarkets don't? Mine also has 2 vacuum lines and an exhaust heat riser. It also has a little tube that goes to the heads on the block. What do these things all do, and why don't the aftermarket ones have them?

Sent from my SM-G950U using Tapatalk

the stock air cleaner assembly is an emissions device. it is designed to draw warm air off the exhaust manifold in order to bring the engine to operating temp faster. A cold engine running on the choke produces a lot of emissions. aftermarket air cleaner is less restrictive has more horsepower potential and looks better to a gear head, everyone knows chrome make you car faster lol. The heat riser is on the exhaust manifold it closes the exhaust pipe on the passenger side forcing hot exhaust through a passage under the intake manifold again helping to heat the engine faster reducing emissions. As for the vacuum hoses and tube you need to post a photo.
 

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350
I ran an aftermarket air cleaner for years in very cold temps and had no issues with cold starts.

If you're getting rid of the stock one, I'll buy it off you.
I don't think im getting rid of it yet, I'm not sure if it would pass emissions without it. I'll have to see. But it does have a fresh coat of high heat black paint!
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,389
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
Then don’t think about getting rid of the cat, or you’ll definitely fail emissions.
 

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350
Then don’t think about getting rid of the cat, or you’ll definitely fail emissions.
Haha I was just joking. I wish I could do that.

Sent from my SM-G950U using Tapatalk
 

Hatchet54

Full Access Member
Joined
Oct 23, 2018
Posts
276
Reaction score
251
Location
Wyoming
First Name
Red
Truck Year
1977
Truck Model
1500 Sierra Grande
Engine Size
350
Maybe slightly unrelated, but does anyone have any experience with one of these?
You must be registered for see images attach
 

Dave 84

Full Access Member
Joined
May 20, 2019
Posts
88
Reaction score
27
Location
Arizona, glendale
First Name
Dave
Truck Year
1984
Truck Model
K5
Engine Size
5.7
When you live in Arizona none of this is necessary lol it was 90 degrees at 8am I'm thinking about how long I can drive my k5 till it vapor locks! Lol
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,305
Reaction score
2,282
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
If you want your engine to breathe well, don't buy one of those goofy looking small diameter air cleaners. For best air flow you want a large diameter air cleaner with as tall an element as possible.

The snorkel is basically an emissions device, and was effective at warming up the air for better operation of a cold engine. However, since performance engines perform better with cold air, the snorkel was then ducted up to a hole in the radiator support to provide cold air after the engine was warm. Since high performance engines needed more cold air, some got dual snorkel air cleaners, or had cowl induction hoods.

On small performance cars its usually beneficial to have the snorkel connected to the radiator support, since underhood temps are high and you want to give the engine cooler air. However, a squarebody has such a large engine compartment that I don't think underhood temps are as high. One very simple way (already mentioned) to take the snorkel out of the equation in the summer is to flip the air cleaner lid and let the stock setup draw air all the way around the air cleaner.

Bruce
 

Arkansas_V8

Proud Redneck
Joined
Jul 1, 2019
Posts
3,022
Reaction score
3,963
Location
Springdale, Arkansas
First Name
Brent
Truck Year
88
Truck Model
V20 Suburban
Engine Size
5.7
When you live in Arizona none of this is necessary lol it was 90 degrees at 8am I'm thinking about how long I can drive my k5 till it vapor locks! Lol

I had that issue on some days here in Arkansas.

The snorkel, and heat wrap on fuel lines have solved both times I suffered vapor lock.

You can see how tucked my exhaust is in some of my pics, heat wrap solved that on my TBI. Real close to lines, and filter.

On my old Suburban with a carb, the snorkel alone was the answer. I was boiling in the carb.


These were not daily occurrences by any means(more often TBI). But often enough to annoy.
 
Last edited:

Forum statistics

Threads
44,424
Posts
957,530
Members
36,776
Latest member
Love Samantha
Top