Dash Pad Install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

86c10twotone

Full Access Member
Joined
Jun 3, 2021
Posts
56
Reaction score
73
Location
MD
First Name
Roy
Truck Year
86
Truck Model
Silverado
Engine Size
305
Installing a LMC pad and it’s sitting up to high on the passenger side .After hours of trying to figure out what the issue is I found that the second to last clip area is sitting up a 1/4 inch higher then the one to the left and the far right corner. This also wouldn’t allow the dash to go all the back against the windshield rubber. I’ve contacted LMC awaiting a response on getting a replacement
 

Attachments

  • 0358794A-0C1A-44F9-A6BD-121BB0A1DB65.jpeg
    0358794A-0C1A-44F9-A6BD-121BB0A1DB65.jpeg
    135.2 KB · Views: 145
  • 95260293-C518-476B-956A-D65B6B12DB8B.jpeg
    95260293-C518-476B-956A-D65B6B12DB8B.jpeg
    131.8 KB · Views: 127
  • 00E5CA94-090B-4FD0-A010-FFB7D3A02E6C.jpeg
    00E5CA94-090B-4FD0-A010-FFB7D3A02E6C.jpeg
    136.7 KB · Views: 148

waterpirate

Full Access Member
Joined
Jan 2, 2019
Posts
930
Reaction score
2,230
Location
delaware
First Name
Eric
Truck Year
1987
Truck Model
v10
Engine Size
5.7 tbi
The quality on these dash pads seem to be all over the place. It took me 3 hours to get mine to fit correctly, I cut and bent **** to get that far. One thing I found out is that if you installed new speakers when the pad was off, the new ones do not sit flat in the brackets.
Eric
 

86c10twotone

Full Access Member
Joined
Jun 3, 2021
Posts
56
Reaction score
73
Location
MD
First Name
Roy
Truck Year
86
Truck Model
Silverado
Engine Size
305
I even tri d to install it without the speakers or brackets
 

midwest

Full Access Member
Joined
Dec 28, 2021
Posts
185
Reaction score
200
Location
Indiana
First Name
Scott
Truck Year
1986
Truck Model
K20
Engine Size
350
I contacted LMC about an issue with my headliner. It took them over a month to get back with me and then another several weeks after that to get the correct reply.
They wouldn’t let me talk to any of the techs directly. I had to explain my issue to a lady on the phone, she emails the tech people, then a month later she called back. Of course she hadn’t worded the original question to them correctly so the answer I got was not what I needed. After the second tI’ve back and forth they agreed to send me a new one. Hopefully you get a quicker response from them. I wasn’t sitting around waiting for the answer so it wasn’t a huge deal to me.
 

My78truck

'Ol Holly
Joined
Apr 7, 2019
Posts
307
Reaction score
260
Location
Virginia
First Name
Becky
Truck Year
1978
Truck Model
C10 Silverado
Engine Size
5.7L
Installing a LMC pad and it’s sitting up to high on the passenger side .After hours of trying to figure out what the issue is I found that the second to last clip area is sitting up a 1/4 inch higher then the one to the left and the far right corner. This also wouldn’t allow the dash to go all the back against the windshield rubber. I’ve contacted LMC awaiting a response on getting a replacement
You may have already done this, but here is a video that might help. I know they make it look easy and is the perfect install. My dash pad I needed to trim on the passenger pillar side to get it to push back into place correctly.
xc_hide_links_from_guests_guests_error_hide_media
 

86c10twotone

Full Access Member
Joined
Jun 3, 2021
Posts
56
Reaction score
73
Location
MD
First Name
Roy
Truck Year
86
Truck Model
Silverado
Engine Size
305
Thanks for the note . Yes I watched it . Lmc is sending a replacement they have great customer service!
 

Latest posts

Forum statistics

Threads
44,163
Posts
950,649
Members
36,276
Latest member
2manysquares2care
Top