SrMousse
Member
- Joined
- Sep 30, 2018
- Posts
- 35
- Reaction score
- 34
- Location
- Colorado
- First Name
- Jacob
- Truck Year
- 1991
- Truck Model
- V1500
- Engine Size
- 350
I've got a 91 burb. I cleaned up the whole dash console with LEDs, dusted, cleaned, etc. Replaced speakers while I had the dash apart. I got it all back together, working and looking great!
Then it was time for the stereo install. The previous owner had an"interesting" wiring job. The aftermarket stereo power line was stolen from the under dash for light... No big deal, I've seen worse... As I was getting the new deck wired, I attached the battery to make sure it was all working before I buttoned it up. Everything looked and sounded great! But a couple wires were tangled...
In the process of untangling, like an idiot, I dropped the hot wire and it touched the dash with a single spark... I lost power, to that line, and to the whole dash (urn signals, 4wd, and check engine lights so still work)!!
Now here's the kicker, not a single fuse is blown! I've verified, there is no power going to that wire.
I'm not sure where to go from here! Thoughts?
Then it was time for the stereo install. The previous owner had an"interesting" wiring job. The aftermarket stereo power line was stolen from the under dash for light... No big deal, I've seen worse... As I was getting the new deck wired, I attached the battery to make sure it was all working before I buttoned it up. Everything looked and sounded great! But a couple wires were tangled...
In the process of untangling, like an idiot, I dropped the hot wire and it touched the dash with a single spark... I lost power, to that line, and to the whole dash (urn signals, 4wd, and check engine lights so still work)!!
Now here's the kicker, not a single fuse is blown! I've verified, there is no power going to that wire.
I'm not sure where to go from here! Thoughts?
