CUCV with rear disc - no park brake?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Chris825

Junior Member
Joined
Jan 17, 2021
Posts
6
Reaction score
4
Location
Florida
First Name
Chris
Truck Year
1985
Truck Model
K10
Engine Size
Cummins 4BT
Hello all - I have a square body with CUCV front and rear axles under it. The rear has disc brakes and I am learning that these must be a bolt on conversion? The trucks original parking brake cable is rolled up and not being used. I have looked where to connect it and am finding nothing. Just wondering if the experts on here can help be confirm that these must be a bolt on kit and no parking brake is available.

if this is the case, can anyone recommend something I may try, are those drive line parking brakes worth trying? It does have a divorced np205 transfer case if that helps any with options to try.

Attached are a few pictures, I may need to provide some with the wheels off…
 

Attachments

  • PXL_20210321_163305858.jpg
    PXL_20210321_163305858.jpg
    157.5 KB · Views: 107
  • PXL_20210321_163247366.jpg
    PXL_20210321_163247366.jpg
    161.6 KB · Views: 123
  • PXL_20210321_163234973.jpg
    PXL_20210321_163234973.jpg
    142.3 KB · Views: 116

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
Hello all - I have a square body with CUCV front and rear axles under it. The rear has disc brakes and I am learning that these must be a bolt on conversion? The trucks original parking brake cable is rolled up and not being used. I have looked where to connect it and am finding nothing. Just wondering if the experts on here can help be confirm that these must be a bolt on kit and no parking brake is available.

if this is the case, can anyone recommend something I may try, are those drive line parking brakes worth trying? It does have a divorced np205 transfer case if that helps any with options to try.

Attached are a few pictures, I may need to provide some with the wheels off…
Yes, someone converted to rear disk at some point.
You can swap the calipers for the 70s Cadillac ones. They have a lever that will connect to the original ebrake setup.
Try this site for more info.
 

Chris825

Junior Member
Joined
Jan 17, 2021
Posts
6
Reaction score
4
Location
Florida
First Name
Chris
Truck Year
1985
Truck Model
K10
Engine Size
Cummins 4BT
Yes, someone converted to rear disk at some point.
You can swap the calipers for the 70s Cadillac ones. They have a lever that will connect to the original ebrake setup.
Try this site for more info.
Thank you sir — this is exactly what I am looking for!
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,958
Reaction score
2,460
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
Are you sure it’s a cucv? They never had a divorced tcase and only a very few special models had a married 205.

Just saying in case something misinformed you about your truck.
 

Chris825

Junior Member
Joined
Jan 17, 2021
Posts
6
Reaction score
4
Location
Florida
First Name
Chris
Truck Year
1985
Truck Model
K10
Engine Size
Cummins 4BT
Are you sure it’s a cucv? They never had a divorced tcase and only a very few special models had a married 205.

Just saying in case something misinformed you about your truck.
The NP is original from the 1985 Chevy, it has a Cummins 4BT in it with an Allison transmission. The transfer case has been divorced with twin sticks etc. I mentioned it incase there was a gadget out there for a parking brake that attaches to the transfer case…

Lugnut 4x4 has the exact kit I need for the Dana 60 rear end, already have it in the shopping cart. I’ll post a follow up with pictures once it is in place.
 

Forum statistics

Threads
44,173
Posts
950,857
Members
36,288
Latest member
brentjo
Top