Crew cab exhaust

[Slooptin]

Anyone know who sells an exhaust kit that fits a crew cab? I'm looking for 2.25" or 2.5" kit that has all the pipes I need to run true duals out the back. most kits I'm finding are for suburbans or single cabs

 

[PrairieDrifter]

Get a regular cab kit and add a few feet of extra pipe? Under the cab most likely, as the tailpipes will be the same.

 

[75gmck25]

2.5" exhaust kits for the 4WD trucks are hard to find, and the few that offer them are really expensive. I think its more due to the limited demand than the actual parts cost.

I used a 2.25" kit from Summit and each pipe comes in about five pieces - head pipe, head pipe extension, intermediate pipe, tailpipe (over axle) and the turn-downs. All you would need to do is extend the intermediate pipe to allow for the extra length of your truck.

 

[AuroraGirl]

2.5" exhaust kits for the 4WD trucks are hard to find, and the few that offer them are really expensive. I think its more due to the limited demand than the actual parts cost.

I used a 2.25" kit from Summit and each pipe comes in about five pieces - head pipe, head pipe extension, intermediate pipe, tailpipe (over axle) and the turn-downs. All you would need to do is extend the intermediate pipe to allow for the extra length of your truck.

does the true dual exhaust use different place to hang the exhaust or does it just mount a hanger on the other side of the driver side one?
I know my 78 k10 has 2 hangers and my truck doesnt have a proper hanger(so not sure on spot lol) or if a crew cab has a longer exhaust needing more hangers

 

[Hoss]

I also have a crew cab 454. I'm installing hedman longtube headers with my new engine build. I have a shop in town I'm going to take it to for exhaust work. Planning on 2.5 inch with either flowmasters or Borla. Does anyone know if flowmaster 40s are still made in USA?

 

[PrairieDrifter]

I also have a crew cab 454. I'm installing hedman longtube headers with my new engine build. I have a shop in town I'm going to take it to for exhaust work. Planning on 2.5 inch with either flowmasters or Borla. Does anyone know if flowmaster 40s are still made in USA?

My super 10's from a couple years ago said made in the USA on the box still.

 

[Craig 85]

I also have a crew cab 454. I'm installing hedman longtube headers with my new engine build. I have a shop in town I'm going to take it to for exhaust work. Planning on 2.5 inch with either flowmasters or Borla. Does anyone know if flowmaster 40s are still made in USA?

I have Flowmaster Super 50's on my K30. 2.5" pipe and an all stock smogged down 454.

xc_hide_links_from_guests_guests_error_hide_media