Cragar S/S wheel lug nuts???

[ProStreet83C10]

Hey guys, i picked up some used Cragar S/S wheels - without lugnuts, and id like to know which of these lug nuts my 83 C10 takes.
Not sure what all this means haha


.800 SHANK MAG STYLE LUG NUTS & WASHERS - 5x4.5, 4.75, 5 BOLT CIRCLE

27721-4 7/16 RH with center hole washers .684 Diameter
27723-4 1/2 RH with offset washers .684 Diameter
27727-4 1/2 LH with offset washers .684 Diameter
27780-4 1/2 RH with center hole washers .684 Diameter
27792-4 7/16 RH with offset hole washers .684 Diameter
27846-4 14mm-1.50 with center hole washers .750 Diameter
27732-4 12mm-1.25 RH with center & offset hole washers .684 Diameter
27733-4 12mm-1.50 RH with center & offset hole washers .684 Diameter

 

[J Knight]

Should be 27723-4

 

[ProStreet83C10]

Awesome, Thanks John!!

 

[Evans Ward]

Would that part number be the same for an 87 truck with Cragar 610G SS wheels.

 

[Swims350]

not sure what lug nut size these truks use but you definately want the offset washers because of the 5x5 pattern.

 

[Evans Ward]

Had the new wheels put on today at tire shop with conventional lug nuts. Truck rode like a worn out wagon! Going to Summit Racing tomorrow to talk with reps there and purchase the correct Cragar lug nuts. Cragars are 610G SS with correct 5 on 5 bolt pattern, +00 offset. Lug needs a shank to cover wheel stud and secure properly. I think this stud also uses an offset washer.

If anyone knows for sure, please reply. Thanks in advance!

 

[Swims350]

if your wheels do not have the unilug hole all you need is a reg. washer, the offset washers are to cover the oblong holes in the unilug pattern wheels.