Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sorry buddy. That deal isn't going to happen. Seats were NOT in it when I got there, he said his wife decided she wanted them. The rear bumper was hit so there was not much value to it, the tailshaft housing was missing to the NP205, the Th350 was a 2wd Th350 with a 4x4 output shaft in it that someone tried to drill and tap the converter cover holes into and failed miserably so that portion of the case was blown out on both sides and no cover or strut rods included. It did have front 10 bolt, rear 12 bolts but ratio unknown and I couldn't spin the drums or rotors and the spid label in the glove box door was in the glove box door he gave to someone else. Brakes were bad and eating at the rotors in the front. Door panels were so brittle they were broke out into bits on the top even they did look good straight on. No wheels to speak of, no rear driveshaft. In short, all I would have been buying was the front driveshaft that I think I have, and the Th350/NP205 output shaft that I can get off ebay for $39 and a **** ton of work to get a trailer and drive out there, **** ton of work to load it, then drive out to my dad's unload it and then take the trailer back to OKC and drop it off. Just wayyyyy to much work for little to gain and out $400 I'm sure he'd have taken for it. He did have a craigslister that offered him $300 for the Th350 and NP205 but was a noshow. If the guy does show up, he'll be sorely disappointed to see the tailshaft missing to the NP205 and the Th350 with a 2wd case and blown out poorly drilled out bolt holes. The 2wd Th350 just doesn't have the meat that the 4x4 Th350 had and that's what I was really wanting was that core. I told him I know he'd had a $300 offer, but he's a now show and when he sees what I see I'm not sure he'd be willing to give $300 either, so not to insult you but I'd offer you $200 for the front Dshaft, NP205 missing the tailshaft and the Th350 output shaft cuz that's all the value there is. He said he'd wait to see if that guy shows and let me know if he doesn't.
Looks super solid. Wonder what kinda shape the interior is in?
