Blue Smoke Blues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Baker11b

Junior Member
Joined
Feb 22, 2023
Posts
6
Reaction score
2
Location
San Antonio, Texas
First Name
Alexander
Truck Year
1984
Truck Model
C10
Engine Size
5.7
So I originally thought I had an issue with valve stem seals cause I get a little blue smoke on startup. The thing is it only happens when I crank the engine when it's already warm. And sometimes it will do it under load or in reverse. But again it's not much and not every time. Just trying to get some insight on what's going on before I make my next move. Other than that motor runs great. Plenty of power. I'm thinking it's piston rings. Thanks.
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,937
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Does sound like valve seals. Will eat more oil under high vacuum, ie idle.

Borescope then wet and dry compression test. Bad rings, offending cylinder will be clean on the edges.

Depending on the year, heads could already be cut for PC seals.

Oil smoke under load will usually be rings.

If automatic check vacuum modulator.

Hit some odd key disregard lines.
 

Latest posts

Forum statistics

Threads
44,167
Posts
950,740
Members
36,282
Latest member
Doug Hampton
Top