Anyone use intelitronix dash

[73c20jim]

Can't set up speedo and tach.

 

[4WDKC]

Have them in my vette

 

[73c20jim]

I can't turn on speedo and tach.. Stuck in set up mode.

Tach rotates thru options then I can't get out of setup mode.

Can't do speedo now, driveshaft coming out. Called support and they were useless.

Can you help???

Thanks.

 

[4WDKC]

I can't turn on speedo and tach.. Stuck in set up mode.

Tach rotates thru options then I can't get out of setup mode.

Can't do speedo now, driveshaft coming out. Called support and they were useless.

Can you help???

Thanks.

do you have the instructions? Mine said to cut a specific wire for 6 cyl, cut a different wire for v8, do nothing for 4 cyl.

 

[73c20jim]

No wires to cut. All done in setup mode. And I can't get out of setup mode.

 

[4WDKC]

what dash did you buy?

 

[73c20jim]

73 c20 pu

All gauges.

 

[4WDKC]

73 c20 pu

All gauges.

like this

You must be registered for see images attach

 

[86Peter454]

i have yet to hear anything very good about these gauges. pretty upsetting because they are cheap and look cool but sadly i probably wont ever get them.

 

[4WDKC]

i have yet to hear anything very good about these gauges. pretty upsetting because they are cheap and look cool but sadly i probably wont ever get them.

I have them in my car and have no problem with them.

 

[86Peter454]

I have them in my car and have no problem with them.

well you are the first ive seen lol.

when did you buy and how long have you had it installed?

maybe they have gotten better recently if you purchased it recently? and its possible (depending on how long you have had it installed) that its just a matter of time before you have issues. but most people seem to have issues during installation or shortly after.

 

[4WDKC]

well you are the first ive seen lol.

when did you buy and how long have you had it installed?

maybe they have gotten better recently if you purchased it recently? and its possible (depending on how long you have had it installed) that its just a matter of time before you have issues. but most people seem to have issues during installation or shortly after.

4 ish years, bought them refurb on ebay.

 

[73c20jim]

like this

You must be registered for see images attach

yes

 

[4WDKC]

I didnt have to set mine up just cut the wire for the tach and connect the vss for the speedo.

nowhere does this say you need to calibrate, did you enter calibration or did it do it on its own?
https://www.egaugesplus.com/uploads/8/5/2/4/8524701/dp6004.pdf

 

[73c20jim]

I didnt have to set mine up just cut the wire for the tach and connect the vss for the speedo.

nowhere does this say you need to calibrate, did you enter calibration or did it do it on its own?
https://www.egaugesplus.com/uploads/8/5/2/4/8524701/dp6004.pdf

My instructions are the same, plus includes tachometer calibration.