Air compressor for painting my project
- Thread starter TnSnapp
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Doppleganger
Full Access Member
- Joined
- May 24, 2019
- Posts
- 12,705
- Reaction score
- 58,940
- Location
- OH-MI: Just like it sounds
- First Name
- Chris
- Truck Year
- 1985
- Truck Model
- K20
- Engine Size
- 5.7
I'd say yes as you can get away with a smaller compressor for primer than you can with actual paint. Its the color / paint stage you dont want a smaller compressor cycling for long runs.
TnSnapp
Full Access Member
- Joined
- Dec 22, 2017
- Posts
- 81
- Reaction score
- 127
- Location
- Tennessee
- First Name
- Mark
- Truck Year
- 1986
- Truck Model
- Scottsdale
- Engine Size
- 350
Ok thanks I have had this compressor for years but only used it for airing up tires. I have never painted anything with it I have a spray gun but it isn’t what I need according to the utube videos I been watching. Apparently I need a hvlp spray gun.
Scratcher
Junior Member
- Joined
- Jan 14, 2019
- Posts
- 8
- Reaction score
- 1
- Location
- San Antonio
- First Name
- Erik
- Truck Year
- 1979
- Truck Model
- c10
- Engine Size
- 350
That compressor puts out 8.8 scfm. Most paint guns use about 11-13 scfm. After a couple panels your atomization will greatly suffer. Eastwood makes a gun that is designed specifically for that kind of situation. I use to use the Concourse gun at home before I got a larger compressor. It yields good results.
GTX63
Full Access Member
- Joined
- Nov 27, 2022
- Posts
- 933
- Reaction score
- 3,791
- Location
- Tennessee
- First Name
- Ty
- Truck Year
- 1985
- Truck Model
- K10
- Engine Size
- 350
A HPLV gun is suitable for smaller 110v compressors. You can buy throwaway versions from Harbor freight or nicer versions for more money.
I paint with a 30 gallon tank and have another 25 gallon backup. The thing is that the compressor motor is going to heat up from the run time to fill both tanks, and I am not a fan of the oilless compressors at all. Keep your tanks drained of water and use in line filters.
Lots of folks will tell you that you cannot get a quality paint job from a small compressor. Yes you can.
Pay attention to air pressures, use decent grade paints and prep prep prep. At the minimum, you can paint sections/panels at a time.
I paint with a 30 gallon tank and have another 25 gallon backup. The thing is that the compressor motor is going to heat up from the run time to fill both tanks, and I am not a fan of the oilless compressors at all. Keep your tanks drained of water and use in line filters.
Lots of folks will tell you that you cannot get a quality paint job from a small compressor. Yes you can.
Pay attention to air pressures, use decent grade paints and prep prep prep. At the minimum, you can paint sections/panels at a time.
Similar threads
