Air Cleaner Stud

[VPC20HD]

Hello,

I have a tall air cleaner for my 82 C20 and obviously I need the Stud to hold it in place.

I found this 8.5 inch Stud but it's $40, plus the shipping is $21 for some reason.

https://hammondmotorsports.com/air-cleaner-stud-kit-extra-long-8-5/

$61 for an air cleaner stud... I'll pay it if I have to but is there a better option?

Thank You

 

[nvrenuf]

Go your local Autozone, et al and see if they have any all thread / threaded rod. Stores used to keep this in stock in various lengths.

Also, check Home Depot or Lowes.

Most carbs use 1/4-20.

 

[PrairieDrifter]

You can also get bare 1/4 rod. Then just cut threads on each end.

 

[HotWheelsBurban]

Hello,

I have a tall air cleaner for my 82 C20 and obviously I need the Stud to hold it in place.

I found this 8.5 inch Stud but it's $40, plus the shipping is $21 for some reason.

https://hammondmotorsports.com/air-cleaner-stud-kit-extra-long-8-5/

$61 for an air cleaner stud... I'll pay it if I have to but is there a better option?

Thank You

Man even NOS or stainless steel should be cheaper than that....1/4-20 threaded rod, usually comes in a foot long stick, just cut to measure.

 

[mlsceo]

Ace hardware

 

[Rusty Nail]

Ill sell you mine -out of the truck-for half that.
Holla atcha boi!

$30 ~ pst

 

[84GMCSierra]

As mentioned above and as I've done. Threaded rod. Measure, ad nuts to each end, cut to length, round/smooth the ends then use the nuts to clean the threads and your good to go.

 

[WFarm]

Threaded rod works, but I picked this up at O'Reilly's because I also wanted that over-sized stamped wing nut.

You must be registered for see images attach

 

[Johnny Atomic]

I ordered this threaded rod from Amazon when I changed from short air cleaner to tall air clean lid.

https://www.amazon.com/gp/product/B0CZJGNM9G/

 

[Orion]

I ordered this threaded rod from Amazon when I changed from short air cleaner to tall air clean lid.

https://www.amazon.com/gp/product/B0CZJGNM9G/

Ah the ol' 5HP Briggs and Stratton. Terrifying power.

 

[Ken B]

surfing thru here you find parts #s faster than some of the parts houses....WFarm thanks. was thinking about that rod and poof you already had the part #.
thanks