A/C Compressor Wiring

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rileydale01

Junior Member
Joined
Aug 1, 2023
Posts
1
Reaction score
0
Location
Texas
First Name
Riley
Truck Year
1981
Truck Model
Sierra Grande C10
Engine Size
350
Just picked up a 1981 c10 and I’m trying to get the AC working. Whenever I move the controls on the unit inside the truck, I get nothing at all, so I’m assume blower motor. I checked all fuses and they are fine. I also have the issue with some of the under hood wiring. This truck was originally a 305 and had a 350 swapped into it and seems like the A/C was never plugged back up. I need help trying to find the A/C sub harness because everything I’m seeing online doesn’t look correct to me. Any help is appreciated!
 

Attachments

  • IMG_1364.jpeg
    IMG_1364.jpeg
    154.8 KB · Views: 249
  • IMG_1362.jpeg
    IMG_1362.jpeg
    176.2 KB · Views: 271
  • IMG_1363.jpeg
    IMG_1363.jpeg
    175.8 KB · Views: 192

MarineOne

Full Access Member
Joined
Jan 12, 2023
Posts
440
Reaction score
454
Location
Western New York
First Name
David
Truck Year
1986
Truck Model
K25
Engine Size
454
if it's same as 77 I have a harness let me know
 

consti2tion

Member
Joined
Oct 16, 2021
Posts
45
Reaction score
54
Location
East Texas
First Name
Cw
Truck Year
1986
Truck Model
C20 Suburban
Engine Size
454
That distribution block needs 12v going to it. When you move the climate control to any of the AC settings it should energize a green wire going to the low pressure cut off switch on the accumulator. Just to test and see if you get 12v out of one of the green wires in your second picture you can put a jumper wire in the low pressure switch connector. Do not attempt to use your AC with that low pressure switch bypassed.
 

Latest posts

Forum statistics

Threads
44,165
Posts
950,710
Members
36,279
Latest member
MTBR12
Top