f6john
Full Access Member
- Joined
- Nov 12, 2010
- Posts
- 304
- Reaction score
- 136
AC would be great, right now the only window I can open in the square is the vent window. Needless to say it has been sitting a lot lately.
89 Trans Am
- Thread starter yevgenievich
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 10,041
- Reaction score
- 10,138
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
LoL!
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
Switched to a solstice gxp for few days, now I want one. Moving on with AC work on the TA
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
Hoping original 98 ac compressor still works. Have the hoses and tubing sorted. Installing tonight.
You must be registered for see images attach
Last edited:
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 10,041
- Reaction score
- 10,138
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
It'll work..
Say, what am I lookin at in the last picture of the four above?
Say, what am I lookin at in the last picture of the four above?
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
Ac compressor hidden below everything. Only ac hoses coming up visable. On the hard line, I changed one side from #6 to #8 fitting( i am running 92 condenser) and also changed the pressure switch connector to one from fourth gen because I need to run a fourth gen pressure switch. It sends actual pressure signal to ecm.
Last edited:
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 10,041
- Reaction score
- 10,138
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
Oic...Huh.
Good luck with that.
Good luck with that.
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
Ac is working. One of the fans is not working, so will need to sort that out. It is fan #1 and is probably the one that turns on for the ac. Had to manually command fan #2 to turn on during a charge. Was in a hurry, will work with it again a bit later.
You must be registered for see images attach
You must be registered for see images attach
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 10,041
- Reaction score
- 10,138
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
Awesome man, congratulations. 
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
got a feon leak. It held vacuum for half a day, but apparently a bit of freon is too much. That used ac compressor might be coming back to bite me.
- Joined
- Aug 3, 2010
- Posts
- 30,650
- Reaction score
- 28,976
- Location
- Usually not in Ohio
- First Name
- Andy
- Truck Year
- '77, '78, '79, '84, '88
- Truck Model
- K5 thru K30
- Engine Size
- 350-454
No matter how long it holds vacuum, it's never a guarantee that it will hold pressure.
Sorry to hear though.
Sorry to hear though.
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
Well another used compressor installed, except it had a bad pulley bearing. Swapped from a leaking compressor and it is working now. Also fixed the fan signal wire and figured out the pressure sensor issue. Harness builder had two pins on the connector backwards. I had been driving with a resistor to bypass pressure sensor so far, but had to turn off at stop lights because fan was not triggering. Now should be all better.
You must be registered for see images attach
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
Installed a reman compressor. Will see how well it lasts.
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
Very painfully slow, but it is progressing towards being painted. Gave up and took it to someone for a repaint. I can do paint work but hate doing prep.
You must be registered for see images attach
- Joined
- Aug 19, 2010
- Posts
- 28,494
- Reaction score
- 9,581
- Location
- Kansas City, Mo
- First Name
- Jacob
- Truck Year
- 1977/1990/1991
- Truck Model
- C10 longbed/R1500 Burb/R3500 Dually
- Engine Size
- 350/350/454
I forgot this thing even existed LOL
