82 C10 fuel injection upgrade

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Brian82

Junior Member
Joined
Apr 30, 2017
Posts
1
Reaction score
0
Location
Oklahoma
First Name
BRIAN
Truck Year
1982
Truck Model
C10
Engine Size
350ci
I have an 82 C10. I have already installed a new Chevy Performance SP383 and have a FITech fuel injection system that I am going to install along with the G-Surge fuel pump. I also swapped out the driver's side fuel tank with a new tank and sending unit for an 87 chevy truck. I am running into some issues now as to how to wire up the new sending unit to the older wiring in the truck. Do I need a fuel safety switch along with a fuel pump relay. I am not very savvy on the wiring for a truck. Any help will be greatly appreciated. Thanks again for reading.
 

spanky55amg

I'll give u $5, a hardy handshake, & 5 fish sticks
Joined
Jun 6, 2017
Posts
819
Reaction score
212
Location
Dallas, TX
First Name
Spanky
Truck Year
1984
Truck Model
C10 Short Fleet
Engine Size
V8
NEED? No. Should you? Probably. Did I? No.
I wired mine up out of necessary and lack of time. I would totally do it differently, if and when, I get the time. You can get a relay kit from your favorite part store. I tapped into an IGN port in the fuse block, power straight off the battery to the relay, ground the relay back to the battery, and purple wire to the pump.

They do make another kit to add to the oil pressure sensor (not switch) that if the truck looses oil pressure, it will cut power to the pump. This is how most (if not all) fuel injected cars are wired.

If you wanted to, you could throw a manual switch inline, but if you were in an accident where you were immobilized, you would want it to be automatic.
 

Charlie

Mopar by Birth. Chevy by Choice.
Joined
Aug 2, 2017
Posts
1,837
Reaction score
913
Location
Euless, Texas
First Name
Don
Truck Year
1974
Truck Model
Cheyenne 10 LWB
Engine Size
350/TH350/AC/4 BBL Quadrajet
:welcome:
 

bluex

Full Access Member
Joined
May 9, 2013
Posts
1,987
Reaction score
2,640
Location
Spartanburg SC
First Name
Paul
Truck Year
1978
Truck Model
C15
Engine Size
350
I don't have the fitech but from what I remember when researching the systems the fitech has a pwm fuel pump output that doesn't require an external relay for the electric pump.

I also dont understand why your using the sump system, you bought a 87 tank and sending unit, all you needed was a 60 psi pump to put on that sending unit and you would have been good to go. I used the Ep381, it bolts right into that sending unit.

As far as the fuel level goes just hook your factory fuel level wire to the smaller gauge wire on the sending unit. It should be pink or orange in color. You will also need to hook up the ground to the frame for it to work.
 

smoothandlow84

I'd rather be draggin' frame
Joined
Jan 4, 2015
Posts
2,121
Reaction score
791
Location
Arizona
First Name
Steve
Truck Year
1984 Frame...87 motor and 700r trans
Truck Model
1500 r10 pavement scraper
Engine Size
350 TBI
I love seeing people upgrade to FI on these great trucks. My 87 R30 still has it's first generation TBI, and it's great.
I am in the same boat...my 82 tbi works just fine.
 

Latest posts

Forum statistics

Threads
44,458
Posts
958,357
Members
36,840
Latest member
JTRUCKJMC
Top