77 Rear Speakers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lcfman

Full Access Member
Joined
Aug 13, 2018
Posts
63
Reaction score
16
Location
Murfreesboro, Tenn
First Name
Geary
Truck Year
1977
Truck Model
c20
Engine Size
350
I purchased a set of rear speakers and brackets for my 77 C20 from LMC. The problem is that it looks like (no instructions included) the speaker brackets should mount were the seat belt retractor is mounted. Any pictures or help appreciated.
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,917
Reaction score
4,116
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
I have aftermarket 6x9 brackets, but you can see where I removed the original 4x10 bracket. I'm not sure of the reason for the 2 holes, but either the factory or a PO goofed.

You must be registered for see images attach
 

lcfman

Full Access Member
Joined
Aug 13, 2018
Posts
63
Reaction score
16
Location
Murfreesboro, Tenn
First Name
Geary
Truck Year
1977
Truck Model
c20
Engine Size
350
Your seat belt retractor is low near the floor, mine is higher and lands about where the top of your speaker is.
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
15,950
Reaction score
25,350
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
That sounds strange....
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,352
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
My '77 K5's have had a different seat belt design than the '78 and later, I sort of remember pickups being the same way. Hopefully some members with older trucks will chime in.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,352
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Hmm, back cab wall carpet too. Bucket seats?
 

lcfman

Full Access Member
Joined
Aug 13, 2018
Posts
63
Reaction score
16
Location
Murfreesboro, Tenn
First Name
Geary
Truck Year
1977
Truck Model
c20
Engine Size
350
Yes buckets and back carpet. This is a 60,000 mile truck, and I have the original build/option sheet its the real deal. Back to the rear speakers, maybe the 77 had a different rear speakers than the later models. I am certainly not a squarebody expert but I am learning.
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,221
Reaction score
12,025
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
I'd be impressed if they even offered rear speakers in a '77. Even when we ordered ours in '84 the dealership was wondering why you'd want a four-speaker stereo system in a truck.
 

lcfman

Full Access Member
Joined
Aug 13, 2018
Posts
63
Reaction score
16
Location
Murfreesboro, Tenn
First Name
Geary
Truck Year
1977
Truck Model
c20
Engine Size
350
I bet you are correct blue ox. It would be interesting to see if anyone out there has a 77 or earlier with the dual rear speakers. Post it if you have them. Also included is a photo of the service parts id sticker for my truck. I can slightly modify the speaker brackets to work for me but I was trying to keep the truck as stock as possible since its such a good truck.

You must be registered for see images attach
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,917
Reaction score
4,116
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
On earlier trucks, I've only ever seen this set up for dual speakers. It's on a Gentleman Jim.

You must be registered for see images attach
 

rpcraft

Full Access Member
Joined
May 31, 2016
Posts
1,333
Reaction score
512
Location
Texas
First Name
Robert
Truck Year
1985
Truck Model
Jimmy
Engine Size
LS 6.0 364 CID
I believe the difference in where the seat belt mounts is due to the difference in a half ton vs one ton truck. I'm not 100 % on this but I think there used to be a provision up until the mid 90's where Hd trucks could be operated without seatbelts and this affected where they put the shoulder mount.
 

42Grand

Full Access Member
Joined
Jan 26, 2019
Posts
99
Reaction score
102
Location
Arizona
First Name
Josh
Truck Year
77
Truck Model
C10
Engine Size
350
I bet you are correct blue ox. It would be interesting to see if anyone out there has a 77 or earlier with the dual rear speakers. Post it if you have them. Also included is a photo of the service parts id sticker for my truck. I can slightly modify the speaker brackets to work for me but I was trying to keep the truck as stock as possible since its such a good truck.

You must be registered for see images attach
Is this photo something that all trucks would have hidden somewhere or am I just out of luck if the po didn't hang onto it?

Also, I have a 77 and according to the style of radio that was in it, they only had the one center speaker. My seat belts are the exact same as yours. I bought new aftermarket ones and I really don't want to install them in the original location because I am installing speakers in the rear corners as well. I have a carpet kit installed for the back wall also but if I install the seat belts back in the original location, I would have to cover the top part of my speaker, cut a hole in the carpet and find some mounting brackets to make it all work. I will have to see what others have done previously. Maybe someone can chime in with what they've done.
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,221
Reaction score
12,025
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
They're usually "hidden" in the glove compartment. If yours is missing you may be able to send your VIN to the GM Heritage Center and get your specific build sheet. Somebody here can reproduce the sticker for you. I forget if it's @gmachinz or @chengny but a search should find it for you or maybe they will chime in here.

http://www.gmmediaarchive.com
 

gmachinz

Harnessworx Inc
Joined
Nov 10, 2012
Posts
762
Reaction score
290
Location
Iowa
First Name
Jabin
Truck Year
1986
Truck Model
K10
Engine Size
350
That would be myself who can re-create missing or modified/damaged SPID sheets. I also do other years and decals now as well.

You must be registered for see images attach
 

Forum statistics

Threads
44,173
Posts
950,869
Members
36,288
Latest member
brentjo
Top