6.0 LS to SM465

[snappchevy]

Not sure if this is the place to post this, but to those who have swapped in a 6.0 LS in their trucks, what have you done for the transmission? Looking at my options here and was curious about the 6.0. I was wondering what all I would need to do for my 4 speed (SM465) to bolt to it. My truck is a 77 K20 with a tired 350/SM465/205. Thanks for the help

 

[snappchevy]

This is the truck it would go in, thanks

You must be registered for see images attach

You must be registered for see images attach

 

[hoagster]

You can use your original bellhousing but need to get a new flywheel. I shared a couple pics from my build. https://www.advanceadapters.com/

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[hoagster]

There are other hurdles, shift linkage and exhaust but they can all be over come.

 

[snappchevy]

There are other hurdles, shift linkage and exhaust but they can all be over come.

Thanks, you answered a lot of my questions

 

[dvdswan]

replied on other thread. Please make only one thread per topic.