johnnydefacto
Full Access Member
- Joined
- Feb 4, 2016
- Posts
- 62
- Reaction score
- 0
- Location
- California
- First Name
- John
- Truck Year
- 1989
- Truck Model
- C30 Dually 3+3
- Engine Size
- 454
Front:
3" Bell tech spindles
2" springs (looks like i only got about 1.5" from them, I am guessing my stock springs were tired)
Nitro 2 drop shocks
Rear:
4" Hangers, 4" shackles from Western Chassis
Drop shocks from Western Chassis
Overload spring removed, 4 leafs removed from pack
Got about 6"
Tennessee Wheel and Tire TowNasty's 22.5, 235/40R22.5 tires, Running stock inner dually wheel and tire set up 215/85R16.
Rear Gear swap now has Yukon 3.54's instead of the 4.10's
Sanderson Headers, dual Magnaflow 24" mufflers (up and over the axle)
She is far from complete, but she is very close.
Still need window tint, paint, figure out the rear helper bag situation, front grill and lights, and figure out a few little electrical issues.
Thanks for all your help on this forum, I could not have done it without you guys holding my hand all the way.
3" Bell tech spindles
2" springs (looks like i only got about 1.5" from them, I am guessing my stock springs were tired)
Nitro 2 drop shocks
Rear:
4" Hangers, 4" shackles from Western Chassis
Drop shocks from Western Chassis
Overload spring removed, 4 leafs removed from pack
Got about 6"
Tennessee Wheel and Tire TowNasty's 22.5, 235/40R22.5 tires, Running stock inner dually wheel and tire set up 215/85R16.
Rear Gear swap now has Yukon 3.54's instead of the 4.10's
Sanderson Headers, dual Magnaflow 24" mufflers (up and over the axle)
She is far from complete, but she is very close.
Still need window tint, paint, figure out the rear helper bag situation, front grill and lights, and figure out a few little electrical issues.
Thanks for all your help on this forum, I could not have done it without you guys holding my hand all the way.