454 Cylinder Heads

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,620
Reaction score
28,869
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Good used heads from a running 454 that had lower end noises. Engine ran smooth and did not smoke. They are the garden variety peanut port heads for MarkIV engines. $100, picked up in Madison County Ohio. I seriously doubt shipping them would be worthwhile.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

Tank6x2

Supporting Member
Supporting Member
Joined
Mar 27, 2017
Posts
842
Reaction score
716
Location
Edmonton Alberta Canada
First Name
Kurt
Truck Year
79/86
Truck Model
C30
Engine Size
350, TH400.4:10 gears 2WD
Pretty good deal if someone wants em bucket
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,820
Reaction score
3,401
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
Did you replace them with something better?
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,620
Reaction score
28,869
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Did you replace them with something better?

Nope. They came off of the engine from my '90 454 SS. I simply installed a genV 454 that I had ready to go, with the matching peanut port heads (although shaved) in place of the 454 with toasted bearings. I figure I'll hang onto the short block to build a stroker engine with aluminum heads, likely Trick Flow stuff. But I don't currently have a use for the heads off of the '90 454.
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,820
Reaction score
3,401
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
Nope. They came off of the engine from my '90 454 SS. I simply installed a genV 454 that I had ready to go, with the matching peanut port heads (although shaved) in place of the 454 with toasted bearings. I figure I'll hang onto the short block to build a stroker engine with aluminum heads, likely Trick Flow stuff. But I don't currently have a use for the heads off of the '90 454.
Was curious as I am looking for a cheaper decent aluminium head set up to get eventually as replacement for vortec gen 6 heads. But will be a long while before that gets going.
 

68post

very, VERY, limited access member
Joined
Feb 20, 2014
Posts
281
Reaction score
97
Location
Indianapolis
First Name
Tim
Truck Year
1984
Truck Model
84 K30 SRW Silverado, 85 C20 C6P
Engine Size
454, TBD
Peanuts for peanuts !!!
TTT
 

Latest posts

Forum statistics

Threads
44,416
Posts
957,117
Members
36,753
Latest member
TheRigLivesOn
Top