3.08 Gears. What to Swap to?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Normmus

Member
Joined
Dec 20, 2022
Posts
46
Reaction score
131
Location
Saskatchewan
First Name
Norm
Truck Year
1977
Truck Model
K10
Engine Size
350
Truck is a 1977 K10 with a stock 350, SM465, 31 inch tires, and 3.08 gears. It sees about 70% highway, 20% in town driving, and 10% low speed yard driving (some deep snow, small hills). No towing at all. I am satisfied with the highway performance, but it feels like it needs deeper gears around town but I can live with it. I want to go up to a 33 inch tire and lift it a bit. I know I will need to regear to be satisfied but for new gears I am having a hard time deciding between 3.73 and 4.11. Wondering if anyone has the same drivetrain as my truck and done a swap to 3.73 or 4.11 and what you liked/didn't like about it.

Edited to add - I do not want to swap a different transmission in.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,442
Reaction score
8,670
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Truck is a 1977 K10 with a stock 350, SM465, 31 inch tires, and 3.08 gears. It sees about 70% highway, 20% in town driving, and 10% low speed yard driving (some deep snow, small hills). No towing at all. I am satisfied with the highway performance, but it feels like it needs deeper gears around town but I can live with it. I want to go up to a 33 inch tire and lift it a bit. I know I will need to regear to be satisfied but for new gears I am having a hard time deciding between 3.73 and 4.11. Wondering if anyone has the same drivetrain as my truck and done a swap to 3.73 or 4.11 and what you liked/didn't like about it.

Edited to add - I do not want to swap a different transmission in.
Get a tach drive your truck note your rpms at different speeds. Then look at an online gear ratio calculator,see how many rpms you will be turning at the speeds you commonly drive at. Go drive your truck at those rpms. Are you comfortable at those rpms? Problem solved.
 

Redfish

Full Access Member
Joined
Nov 6, 2021
Posts
2,644
Reaction score
14,257
Location
Prairieville, LA
First Name
Andrew
Truck Year
1987
Truck Model
V1500
Engine Size
350/5.7
My '87 has the stock TBI 350, SM465, 3:42 gears and 33 inch tires. My motor has a few more horsepower than yours so this isn't apples to apples...

I don't have a tach so I cannot give specifics here but for all around town, backroads, 55 mph two lane highways, my gearing is okay. It still pulls like a tractor in 4 Low and as you know the "L" gear on that SM465 is pretty low. I use this pretty frequently. I have not wished for anything lower or higher, but this truck is not my daily driver either.

Based on your usage I would say 3:73. I think 4:11s on the highway would be annoying with 33 inch tires.

My Truck:

You must be registered for see images attach
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,505
Reaction score
6,472
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
3.42-3.73 I think would be satisfactory for your usage.

With the 6.55:1 first (or low) of the sm465 and if that’s not enough you have low range with the transfer case to get something moving.
 

Forum statistics

Threads
44,153
Posts
950,471
Members
36,268
Latest member
JUKA
Top