Joshua8336
Full Access Member
- Joined
- Dec 11, 2011
- Posts
- 298
- Reaction score
- 0
- Location
- Dirty South AL
- First Name
- Joshua
- Truck Year
- 1985
- Truck Model
- c10
- Engine Size
- 4.8
lemme see your square bodies with a 2/4 drop. need some ideas here
2/4 drop pics
- Thread starter Joshua8336
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Sep 29, 2010
- Posts
- 17,174
- Reaction score
- 2,471
- Location
- Green Bastard Parts Unknown
- First Name
- Jay
- Truck Year
- 2001
- Truck Model
- pontiac aztek
- Engine Size
- 3.4
You must be registered for see images attach
Joshua8336
Full Access Member
- Joined
- Dec 11, 2011
- Posts
- 298
- Reaction score
- 0
- Location
- Dirty South AL
- First Name
- Joshua
- Truck Year
- 1985
- Truck Model
- c10
- Engine Size
- 4.8
now about those rims and tires?
J Knight
Full Access Member
- Joined
- Sep 8, 2011
- Posts
- 4,298
- Reaction score
- 141
- Location
- Baytown TX
- First Name
- John
- Truck Year
- 82 Chevy
- Truck Model
- C10
- Engine Size
- 350ci
First a 2/3 then a 4.5/5
You must be registered for see images attach
You must be registered for see images attach
- Joined
- Aug 3, 2010
- Posts
- 30,446
- Reaction score
- 28,352
- Location
- Usually not in Ohio
- First Name
- Andy
- Truck Year
- '77, '78, '79, '84, '88
- Truck Model
- K5 thru K30
- Engine Size
- 350-454
How did you get the 3 inch drop in the rear?
J Knight
Full Access Member
- Joined
- Sep 8, 2011
- Posts
- 4,298
- Reaction score
- 141
- Location
- Baytown TX
- First Name
- John
- Truck Year
- 82 Chevy
- Truck Model
- C10
- Engine Size
- 350ci
For this drop I had an extra set of front and rear springs. I cut one round off of the front springs and for the rear I removed the short leaf and put the over load leaf on top to flatten the spring out. Best part of this drop is its all free.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
- Joined
- Aug 3, 2010
- Posts
- 30,446
- Reaction score
- 28,352
- Location
- Usually not in Ohio
- First Name
- Andy
- Truck Year
- '77, '78, '79, '84, '88
- Truck Model
- K5 thru K30
- Engine Size
- 350-454
Hmm, interesting. How did it ride? Can you still put a couple hundred pounds in the bed without bottoming?
The way I see it, it's free, you can do it without having to screw with the shackle/hanger bolts, and you don't have to notch the bed crossmember (like extended shackles). Sounds too good to be true!
J Knight
Full Access Member
- Joined
- Sep 8, 2011
- Posts
- 4,298
- Reaction score
- 141
- Location
- Baytown TX
- First Name
- John
- Truck Year
- 82 Chevy
- Truck Model
- C10
- Engine Size
- 350ci
It rode ok, and you can still haul a light load.
Joshua8336
Full Access Member
- Joined
- Dec 11, 2011
- Posts
- 298
- Reaction score
- 0
- Location
- Dirty South AL
- First Name
- Joshua
- Truck Year
- 1985
- Truck Model
- c10
- Engine Size
- 4.8
Back to Topic!!!
- Joined
- Sep 29, 2010
- Posts
- 17,174
- Reaction score
- 2,471
- Location
- Green Bastard Parts Unknown
- First Name
- Jay
- Truck Year
- 2001
- Truck Model
- pontiac aztek
- Engine Size
- 3.4
Yeah, I want to get rid of those wheels and tires. I want to go factory. Not sure what shipping from Austin to GA would be though.
Joshua8336
Full Access Member
- Joined
- Dec 11, 2011
- Posts
- 298
- Reaction score
- 0
- Location
- Dirty South AL
- First Name
- Joshua
- Truck Year
- 1985
- Truck Model
- c10
- Engine Size
- 4.8
sending PM
SSniperUSMC
Junior Member
- Joined
- Jan 11, 2019
- Posts
- 1
- Reaction score
- 7
- Location
- Illinois
- First Name
- Luke
- Truck Year
- 1985
- Truck Model
- GMC Sierra
- Engine Size
- 305
2 1/2 up front shackles and hangers in the back
You must be registered for see images attach
rrent
Full Access Member
- Joined
- Sep 12, 2018
- Posts
- 51
- Reaction score
- 57
- Location
- Round Rock Texas
- First Name
- Ronnie
- Truck Year
- 1982
- Truck Model
- Silverzdo
- Engine Size
- 250
You must be registered for see images attach
You must be registered for see images attach
2/4 by previous owner
Rob Goblin
Full Access Member
- Joined
- Sep 9, 2019
- Posts
- 154
- Reaction score
- 79
- Location
- Fayetteville, Arkansas
- First Name
- Rob
- Truck Year
- 1984
- Truck Model
- C10
- Engine Size
- 350
Looks like there aren't many with the 2/4 drop here. I'm debating between the 2/4 and 3/4 Belltech kit myself.
Merlin3e9
Full Access Member
- Joined
- Jun 28, 2018
- Posts
- 101
- Reaction score
- 70
- Location
- Crestview Florida
- First Name
- Jason
- Truck Year
- 1987
- Truck Model
- R10
- Engine Size
- 5.7L
Here is a picture of mine. 2 1/2 inch front, 4 inch rear.
You must be registered for see images attach
You must be registered for see images attach
Similar threads
