1987 6.2L 4x4 new to me and new to here!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mshawn

Full Access Member
Joined
Aug 5, 2022
Posts
81
Reaction score
44
Location
Malvern,Ar
First Name
Micah
Truck Year
1983,1984,1986
Truck Model
c10,jimmy,k10
Engine Size
350,378,482
Welcome from Malvern,Ar I have and 1984 GMC Jimmy 4x4 high Sierra 6.2L I’m sure later you will need 6.2L help. Reach out to me. Also the steering slop could be a broken frame at the steering box. That’s worst case. It would have to be severe to be that sloppy. Also it could be wore out from end parts. You will need to have some one move the steering wheel back and further and you will see movement in the front steering that moves before the tires move. That part that moves but the tires don’t is wore out. Also ball joints and wheel bearings. Let me know when you test the steering joints and you get to the ball joints and wheel bearings and we will guide you trough the process of troubleshooting them. Everybody here are great people and will help with everything. Good luck and reach out if you need help
You must be registered for see images attach
 

Terry Wilkerson

Full Access Member
Joined
Dec 2, 2021
Posts
505
Reaction score
680
Location
Kansas
First Name
Terry
Truck Year
1986
Truck Model
GMC 1500
Engine Size
350
Welcome from KC
Check other salvage gm vehicles for the rear door actuator. I found a actuator for my 86 gmc out of a corvette close in year exactly the same. Mounting bracket was different but I had the one from my truck.
 

smoky1

Junior Member
Joined
Apr 17, 2023
Posts
4
Reaction score
14
Location
utah
First Name
Dave
Truck Year
1979
Truck Model
k 10
Engine Size
427
Welcome from utah!!!
First thing I’d check on that noise on the right side of your dash is your blower motor for your heater etc. The “squirrel cage” is probably dragging on the housing.
 

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,609
Reaction score
4,408
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
Bad ass Burbon. Good luck with your barn doors and dash grinding. My first thought was the clock but then you said it's louder at certain speeds.
 

Big Ray

Full Access Member
Joined
Oct 14, 2022
Posts
1,243
Reaction score
4,255
Location
North Carolina
First Name
Ray
Truck Year
1979
Truck Model
K5
Engine Size
400
Is that actuator different than the others?
Try cleaning and lubing the mechanism and checking the connections for corrosion.
My old barn doors leaked badly. The hinge seals get brittle and crack. Rotted out the bottoms.
 

vr1967

Full Access Member
Joined
Apr 16, 2023
Posts
229
Reaction score
791
Location
Mississippi
First Name
Virgil
Truck Year
1984
Truck Model
k1500
Engine Size
6.2L turbo
Nice looking Suburban.

Check the harmonic balancer on the 6.2. Any signs of cracking in the rubber of it, I’d change it out.
 

Mango

Full Access Member
Joined
Dec 22, 2021
Posts
216
Reaction score
165
Location
JacksonWyoming
First Name
Gil
Truck Year
1989
Truck Model
1500
Engine Size
350
Nice Burb no rust I recently replaced everything in the front steering, New Rag joint still has play going to upgrade to a jeep steering shaft
 

Forum statistics

Threads
44,173
Posts
950,862
Members
36,288
Latest member
brentjo
Top