1985 Stepside fuel hose,help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Richard Bennett

Junior Member
Joined
Jul 13, 2017
Posts
3
Reaction score
0
Location
Youngstown Fl
First Name
Richard
Truck Year
1985
Truck Model
K10
Engine Size
350
I'm in need of a new fuel hose for my 85 Stepside K10 pick up. Nobody seems to have this item or even knows who does help please. I have the one 16 gallon drivers side
Tank. Thanks Rich
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,820
Reaction score
3,401
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
You should have a hardline with a hose on each end. If the hard line is good, then you just need the fuel injection rated fuel hose from a parts store. The reason for getting a fuel injection rated hose, is because it will definately be rated to handle the ethanol that is in the fuel. Older regular hose would fall apart within couple of years.
 

Richard Bennett

Junior Member
Joined
Jul 13, 2017
Posts
3
Reaction score
0
Location
Youngstown Fl
First Name
Richard
Truck Year
1985
Truck Model
K10
Engine Size
350
This is the hose from the Filler neck to the tank. It only has a metal filler neck then the rest is rubber all the way to the top of the tank.​
 

MrMarty51

Full Access Member
Joined
Oct 25, 2012
Posts
7,843
Reaction score
10,122
Location
Eastern Montana
First Name
Martin
Truck Year
1978
Truck Model
K20
Engine Size
400
I too could notfind any fuel rated hose for this application on My 78 K20. I put on some regular radiator hose until something better comes along.
I dont know how well the radiator hose will hold up, but it sure beats nothing and the old hose was cracked and would leak about as much fuel as what was going into the tank.
It has been on there for about two years, this winter I`m going to remove it and see what kind of damage is being incurred toooit.
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,820
Reaction score
3,401
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
Might have to match one from a different vehicle and trim to fit
 

Cuba

Likes to work alone in her woman cave
Joined
Apr 27, 2014
Posts
405
Reaction score
236
Location
Philly, PA USA
First Name
Cuba
Truck Year
89
Truck Model
S10 Blazer
Engine Size
4.3ltr TBI
Many Napa stores carry the fuel rated hose. Granted, it only comes in straight and by the foot, but should work. Just need the ID
 

Richard Bennett

Junior Member
Joined
Jul 13, 2017
Posts
3
Reaction score
0
Location
Youngstown Fl
First Name
Richard
Truck Year
1985
Truck Model
K10
Engine Size
350
Thanks for your help. I got some (flexable) fuel capatable hose from the Industrial hose place in town , it's just not very flexible at all. Its kinda very stuff . Have a long way to go on this truck, moving on to other issues. I will continue to look for other ways to remedy this problem. I'll post it here if I come up with one. Thanks Rich
 

Latest posts

Forum statistics

Threads
44,419
Posts
957,228
Members
36,758
Latest member
PapaD
Top