1980 "K20" build

[BrandonBomer]

Just thought I'd share some info on my truck. Started life as a 1980 c20 292 4 speed that is now on k10 frame with 6 inch sky jacker front springs 5.5 inch rear blocks and 3 inch body. Has the 14 bolt FF from the c20 and a big hub 44 front from a 73, 4 speed, 205, and soon 350. Sits on 16x10s and 39.5x13.50r16 iroks. I'm wanted to do this build "right", but I can only work as fast as I have money. This will pretty much be a for looks truck, with the occasional beach or camping trip. No hard wheeling ( hints the blocks and 52" rears) white k10 was the original doner.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Sent from my ASUS_A006 using Tapatalk

 

[78C10BigTen]

I like it!

 

[BrandonBomer]

I like it!

Thanks. She's definitely always been a pretty truck but was in bad need of a restore, or at least a good going through. Was starting to have a lot of issues.

Sent from my ASUS_A006 using Tapatalk

 

[78C10BigTen]

Looks very good on those big o honkers

 

[78C10BigTen]

I love lifted round eye squares lifted in the ol schoo way. Ill be watchin progress if you start a build thread. Did you tilt the front bumper intentionally?

 

[BrandonBomer]

I love lifted round eye squares lifted in the ol schoo way. Ill be watchin progress if you start a build thread. Did you tilt the front bumper intentionally?

I agree I do to. No the bumper isn't at its final location yet. I'm still getting that right

Sent from my ASUS_A006 using Tapatalk

 

[Dan Miller]

NICE !!

 

[MisterB]

Nice truck. Make sure you replace that stock steering stabilizer. My truck is somewhat similar to yours, and with the stock steering stabilizer, it was downright scary to drive over 50. You can get a single Rancho to go in the stock location for like $60 on Amazon. You might want duals though

Sent from my SM-N975U1 using Tapatalk

 

[BrandonBomer]

Nice truck. Make sure you replace that stock steering stabilizer. My truck is somewhat similar to yours, and with the stock steering stabilizer, it was downright scary to drive over 50. You can get a single Rancho to go in the stock location for like $60 on Amazon. You might want duals though

Sent from my SM-N975U1 using Tapatalk

Ya all the shocks including that where toast. The engine is actually out right now as well. I am thinking of duals though with a new box as well

Sent from my ASUS_A006 using Tapatalk