1975 c20 backfire issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

desmondpaulk

Junior Member
Joined
Sep 20, 2021
Posts
6
Reaction score
2
Location
British Columbia
First Name
Desmond
Truck Year
1975
Truck Model
C20
Engine Size
454
Hi
Just purchased a 1975 C20, 3/4 ton, 454, duel tanks
The owner had it running (both tanks have a mix of 10 year old gas and new 1/4 in each) He ran it on the mix gas. When i went to pick it up, the only thing it needed was belts and fluids. I primed it to start it, but it wouldnt stay running only on the prime. After a few prime, it backfired through the exhaust big time. Not sure why it wont run. it will attempt to run with a couple of pumps on the throttle, but still backfires. my plan is to drain both tanks, new cap and wires/plugs. Any suggestions on what would cause the backfire, would bad gas cause it.
Looking forward to any help.
Desmond
 

dsteelejr

Full Access Member
Joined
May 25, 2020
Posts
239
Reaction score
231
Location
Hudson, WY
First Name
David
Truck Year
1973, 1980
Truck Model
Cheyenne super C20 camper special, Sierra K25
Engine Size
350, 454
Check timing and plug wires for the correct firing order. 1-8-4-3-6-5-7-2
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,853
Reaction score
5,646
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
I've found that exhaust leaks will cause backfires also, if the right conditions are there. Doesn't happen too often but it does happen, I've got an old grain truck that runs perfect but it literally sounds like a cannon. Mainly sounds like that because it has one of those big old 2 foot long 6 inch cylindrical mufflers that blown out its insides straight out the back lol.

One time a brand new muffler exploded like a small bomb, about as loud as an artillery firework shell, split the muffler in half. Was on an fuel injected Ford, just an exhaust leak and the right conditions.
 
Last edited:

desmondpaulk

Junior Member
Joined
Sep 20, 2021
Posts
6
Reaction score
2
Location
British Columbia
First Name
Desmond
Truck Year
1975
Truck Model
C20
Engine Size
454
Thanks for the suggestions. I'll check the firing order when I do the plugs cap and wires. Also thinking with the old gas possible water in it, would that cause the backfire out the exhaust. I can't give it any throttle or it is like a shotgun maybe???
 

Gman73

Full Access Member
Joined
Aug 19, 2021
Posts
101
Reaction score
28
Location
Sacramento
First Name
Gary
Truck Year
1973
Truck Model
Ck20
Engine Size
350 v8
what carb is on it? Could have blown out the accelerator pump, I think it’s firing order related, with gas that old it’s crap full of varnish, you need a clean gas source
 

Ellie Niner

Full Access Member
Joined
Aug 7, 2021
Posts
382
Reaction score
615
Location
Tucson, AZ
First Name
Tory
Truck Year
1986
Truck Model
K10 Silverado
Engine Size
LE9 305
I have sticky valves in my 1962 Studebaker after running on rancid fuel for a bit... two exhaust valves will hang open just enough to cause some rather loud pops and bangs out of the exhaust. Possibility that's what's happening to you.

Since there's no chance of pistons and valves meeting in a Stude V8, I should be able to get those valves freed up by running it on fresh fuel for awhile (and/or maybe making it gulp down some type of solvent that will dissolve the nasty fuel deposits).
 

desmondpaulk

Junior Member
Joined
Sep 20, 2021
Posts
6
Reaction score
2
Location
British Columbia
First Name
Desmond
Truck Year
1975
Truck Model
C20
Engine Size
454
I did solve the issue of backfire. Pulled the cap and rotor, it was burned bad
New cap rotor and plugs she purrs
Thanks for the suggestions
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,936
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Get rid of that old fuel. It could stick valves. Ask me how I know that.
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,751
Reaction score
18,194
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
SeaFoam!
 

desmondpaulk

Junior Member
Joined
Sep 20, 2021
Posts
6
Reaction score
2
Location
British Columbia
First Name
Desmond
Truck Year
1975
Truck Model
C20
Engine Size
454
Get rid of that old fuel. It could stick valves. Ask me how I know that.
I connected a hose and siphon to the line before the fuel pump and siphoned out the old gas. Turns out the tanks were almost empty fuel Guage is sticking showing 1/4 but both are empty
I'm guessing you had some valve damage from your old gas. With the new stuff and fresh gas she runs smoothly
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,936
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Yeah, was a while ago but had bad gas in a 74 Elcamino 454. It stuck an intake valve. Didn't do any damage other that having to remove the heads. If you've ever taken the heads off a 74 Elcamino big block with AC and air injection it will be burned in memory for life.

Although this was before ethanol fuel, today's fuel is even worse as far as storage life. It starts to degrade in 30 days especially on systems that are not sealed, like old trucks.
 

Latest posts

Forum statistics

Threads
44,163
Posts
950,690
Members
36,276
Latest member
2manysquares2care
Top