Search results

  1. Madhorn

    77 K10 LS Swap

    Blower motor quit working on high. I found that the 3 pin connector going to the blower motor relay had melted. I replaced the relay and the connector, fan now works fine. I did open the old relay and found that it had a bad connection on the coil.
  2. Madhorn

    77 K10 LS Swap

    77 has been running great. Well over 30k on it now. 57 was returned to by brother Memorial Day, he was very pleased with the work that had been done. Still hope to get it back from him one day.
  3. Madhorn

    77 K10 LS Swap

  4. Madhorn

    57 Chevy Truck Do Over

    Tail gate latch mod.
  5. Madhorn

    57 Chevy Truck Do Over

    Hanging out with some friends.
  6. Madhorn

    57 Chevy Truck Do Over

    Looks pretty good after a bath. Tried to put some miles on it today but the carb started to flood out. It appears it sucked up some trash and stuck open a needle valve. Removed the bowls and flushed everything out with carb cleaner. All fixed. Will attempt to put on some miles again tomorrow.
  7. Madhorn

    57 Chevy Truck Do Over

    was able to do laps around the yard today! Brakes still need some work and the 700R4 TV needs to be adjusted.
  8. Madhorn

    57 Chevy Truck Do Over

    New eye bolts and spring shackles installed.
  9. Madhorn

    57 Chevy Truck Do Over

    New shackle and spring eye kits arrived.
  10. Madhorn

    57 Chevy Truck Do Over

  11. Madhorn

    Drink holder question?

  12. Madhorn

    57 Chevy Truck Do Over

    I purchased an air hammer thinking it would zip the river heads off. Nope, had to cut the river heads off with die grinder, then beat the rest of the rivet out with a hammer and punch.
  13. Madhorn

    57 Chevy Truck Do Over

    The rivets attaching the mounts to the frame were a booger to get out. Not much space to swing a hammer. Will replace them grade 8 bolts.
  14. Madhorn

    57 Chevy Truck Do Over

    rear spring mounts removed to press out old bushings. No rubber bushings in this set up.
  15. Madhorn

    57 Chevy Truck Do Over

    Replacing all the rear spring pins. Yes one seized in the mount.
  16. Madhorn

    57 Chevy Truck Do Over

    started right up and ran great!! Need to replace rear spring shackles before driving it.
  17. Madhorn

    57 Chevy Truck Do Over

    oil changed and pump primed. Close to cranking it.
  18. Madhorn

    Dart 572 BBC Build

    Sweet build!!
  19. Madhorn

    57 Chevy Truck Do Over

    wiring is just about complete, new fuel tank installed and A/C bracket modified for vortex heads. Getting really close to cranking it up.
  20. Madhorn

    57 Chevy Truck Do Over

  21. Madhorn

    NV4500 Swap - Clutch/Hydraulics Dilemma

    When I was researching doing NV4500 swap into my 77K10 I found that AA has a great tech page on the NV4500. May help you out.
  22. Madhorn

    57 Chevy Truck Do Over

    Finished up the front lights.
  23. Madhorn

    57 Chevy Truck Do Over

    Made some progress on the front front light harness. Head lights are complete. Waiting on new turn signal light assemblies to finish up front. Also had time to run the tail light harness to the rear of the truck.
  24. Madhorn

    57 Chevy Truck Do Over

    I have seen it done somewhere in the past, can’t remember where. This is the first time I have used the idea.
  25. Madhorn

    57 Chevy Truck Do Over

    Using bent washers welded to inner fender for mounting headlight harness.

Latest posts

Forum statistics

Threads
44,436
Posts
957,930
Members
36,805
Latest member
SquaredAway
Top