Search results

  1. Magna86

    Crack/Knick in 350 Cylinder Wall

    Thats now a boat anchor. Thats a crack and needs sleeved but most wont spend that money on a 350.
  2. Magna86

    What have you done to your square lately??

    I used it to pull the new to me shed/coop off the trailer. Didn't think a 6x6 shed was so heavy!
  3. Magna86

    AC Clutch Cycling Switch

    This is the switch I think is bad. I touched it and it can apart in 2 pieces. Still have to check with a test light or meter. Found it on Rock Auto under switches thanks
  4. Magna86

    AC Clutch Cycling Switch

    Does anyone have a source for the AC Clutch Cycling switch besides LMC? I didn't see it on Rockauto or AutoZone. Or a good part number I can search for? Thanks
  5. Magna86

    What new tools have you got lately?

    I have no experience with them before. My other tap and die set is an older craftsman. But the HB set recut/cleaned up the 3/4" threads just fine in the lower control arm shaft.
  6. Magna86

    What new tools have you got lately?

    I buggered one of the lower control arm threads getting the old bushing out. So I needed to buy a new tap and die set as mine only went up to 1/2' Harbor Freight to save the day and pocket book. The set seems really well made. If I was needing to use these all the time I'd spend for a name brand...
  7. Magna86

    What have you done to your square lately??

    No budget for tubular control arms on this truck and for as much as I drive this one not needed. It will be a big improvement replacing original worn suspension and gearbox upgrade to quick ratio.
  8. Magna86

    What have you done to your square lately??

    Maybe we'll see. Front suspension on this beast first, oil pan gasket/rear main seal, probably a timing chain and looks like some brake fun too. Oh the joy hope to be done before memorial day.
  9. Magna86

    What have you done to your square lately??

    Cleaned up the shop and she got to come inside for front suspension rebuild!
  10. Magna86

    73-88 Tailgate

    Here is a great condition tailgate with some surface rust and a few dings on the top edge. Not drilled for trim bezel. $100 picked up in Chesapeake, VA will ship if you want to pay for shipping.
  11. Magna86

    Trailering your square body

    I didn't see the hitch pic. With that being said yes go get a weight distribution hitch and you will be fine.
  12. Magna86

    Trailering your square body

    My 1/2ton LB with the HD springs package is 5600 so yours will be alittle heavier. A weight distribution hitch will make it a smoother ride but your truck will have no issue towing them home. Yes you will be close if not/over the 9200 rating but not to worry the truck will handle it fine. Load...
  13. Magna86

    Anybody got a fully functional cassette player?

    You can send yours out to be serviced by any of the multiple radio refurb outlets. Quick google search will get results. You could have them possibly add bluetooth, RCA's and auto inputs also.
  14. Magna86

    What U-bolts are you guys buying?

    Went on LMC and ordered some there along with a hood bumper kit for roughly what i would have spent locally. Local shops want almost $24 a bolt.
  15. Magna86

    What U-bolts are you guys buying?

    I need to replace the U-bolts when I swap the 6 leaf springs in. What brand are you guys buying? Part#'s. I'm going to ask the spring shop this week for a price too. I tried to remove my original ones to reuse but that's not happening. I'm going to have to cut them off.
  16. Magna86

    What have you done to your square lately??

    TAAP Windshield Washer Pump 6-200 for no delay. Bought it at AutoZone
  17. Magna86

    What have you done to your square lately??

    Out with the old and in with the new electric washer fluid pump. Going to cut some new hose so it wraps better but happy they work!
  18. Magna86

    What have you done to your square lately??

    I finally found a decent deal on the 56" 1825lb rear leaf springs for my suspension rebuild! They were cheaper than Rock Auto too. I have all the pieces for the rebuild. I'll be sending my gearbox out to be rebuilt to a quick ratio.
  19. Magna86

    Fixing Rear Leaf Springs

    As I mentioned before my rear leaf springs are shot on the 76. They are the 56". I'm looking at replacing them with 1800lb springs but they aren't cheap. $260 each plus shipping. I got a quote to have them rearched for $300 but people say cold setting doesn't last. I looked and saw I can buy a...
  20. Magna86

    86 C10 H-code needs a new distributor, recommendations? anything to avoid at all cost?

    Go with the cheapest route first. Take it out/disassemble/clean/reassemble.
  21. Magna86

    Lowering Shackle with 56" Springs

    I'll have to check because honestly, I haven't even looked yet. The rebuild isnt a priority at the moment jsut slow gathering parts to rebuild/replace all of it.
  22. Magna86

    Lowering Shackle with 56" Springs

    But do you have 52" or 56" springs? Mine are 56"
  23. Magna86

    Lowering Shackle with 56" Springs

    I forgot to mention mine is a longbed. So hopefully this means no notching the bed.
  24. Magna86

    Lowering Shackle with 56" Springs

    AS i posted before my 76 needs a complete suspension rebuild. My truck currently has the factory HD 2600LB springs and I plan going down to the 1850lb springs for a better ride. I want to use a 1-2" lowering shackle but not sure I will have to notch the bed like you have to with 52" springs...
  25. Magna86

    GMT 400 W/T

    I wouldn't waste the time or energy on that truck. If your dad wants to let him spend the time and $$. You can find something much better than that to drive and work on minimally. My 2000 when i sold it to my Dad had 320K on it and ran like a top. I only got rid of it to get my 07 Duramax for a...

Latest posts

Forum statistics

Threads
44,424
Posts
957,544
Members
36,777
Latest member
paulteigrob
Top