Search results

  1. 74propu

    1979 Chevy c10. Tail lights

    You can cut the brake light wire after the brake light switch befor the turn signal switch then run a wire from the brake light switch to the rear of the truck to the new brake light . the turn signal switch will never get a brake light signal so it will work as the turn signal only .
  2. 74propu

    What seats are these?!

    My big plan got out voted by the war department She sead the seat in the truck was to comfy and I cant get rid of it . So I am sorry but I will keep looking for a seat for you I find seats all the time :sorry:
  3. 74propu

    Where is the tank selector valve supposed to be?

    The valve itself is in the frame right under the passenger side rear of the cab. there is 2 wires from the dash switch to the valve then from the valve there will be a gas gauge wire going to the 2 tanks Dose your truck have fuel return lines from the fuel pump back to the tank ??? There is 2...
  4. 74propu

    What seats are these?!

    Where in Ga do you live ?? I live in Belleview Fl . I have a very very nice bench seat I would swap seats with you if that is something you would interested in . it is in my 86 right now I can get pics if you like
  5. 74propu

    87 crew cab L29 vortec swap

    Welcome David where in Florida are you?? I just put a 95 TBI 454 4l80e combo in my 86 c10 . is the 98 454 a TBI eng if it is it will be just a plug and play swap . if you are staying 2wd if your going to change it to 4wd then if will get more involved in the wiring and front springs/axel .
  6. 74propu

    PCM Help

    check out this guy http://www.lt1swap.com/ He has a lot of info on ls swap's . when I did my 5.3 into my 74 I used his pin out and it was spot on . he dose do mail order tune and vat delete (you send him your pcm ) .
  7. 74propu

    Crossmember above mufflers

    If it was me I would pull it out and grind out the cracks and weld them closed . Paint it put it back in with All the bolt's and keep a eye on it . but that is just my 2 cent's .
  8. 74propu

    Cab not any time soon

    I know where there is a 100% rust free 1985 a/c cab with title. the guy that has it gave $200 for it and he just wanted the door parts out of the doors.
  9. 74propu

    headers b/b c10

    I ordered a set of headers off e-bay and they look nice . Took off the old truck headers and started putting on the new headers on Friday. finished getting them installed on Monday . what a pain in the a$$ that was none of the head flanges was right if I got one bolt in a flange the other bolt...
  10. 74propu

    4l80 swap - what linkage allows for all gears?

    Did you change the steering column out from the 3 speed auto to a o/d column if not then it will not hit all the gears . I put a 4l80e in my 86 and changed out the column and it still will not go into park right so I am going with this and changing the shifter arm to a 23 in with 2 bends so it...
  11. 74propu

    Unique Engine Combinations / Builds

    Well in 1967 chevy released the 302 in the Camaro it was a 327 block with a 283 crank 202 heads and a solid cam. in 1969 chevy designated it as a DZ eng and it was rated 290 hp for the ins.co. but would put out around 400 hp. and would turn 8000 rpm at the drop of a hat . I had one in the 80s...
  12. 74propu

    Th350 problems after engine swap

    When you put the bolts in the flexplate for the converter did the converter spin easy to line up the bolt holes and have room to move back and forward in the trans pump . If not then you may not of had the converter seated all the way in the pump .when you put the converter back in the trans you...
  13. 74propu

    What is this under the dash?

    the black box with all the wires is the power door lock relay.
  14. 74propu

    73 C10 daily driver project from the mountians of northern Ca..

    I put a ez harness in my74 it was very easy wires are marked every 5 in or so . I put it in the truck in about 5 hr and have not had a problem with it in 2 years.
  15. 74propu

    Temptation

    total stock 2000 5.3 with 80 lb injectors ,2 bar map sensor stock truck intake ,flipped exhaust manifolds with 68mm turbo , 2 to 1 intercooler 2in in 3 in out and 80mm blow off valve , turbo has internal wastgates bought them off e-bay and had them reworked to garet speck's by evergreen turbo ...
  16. 74propu

    Temptation

    I run a 5.3 twin turbo in my 74 c10 short bed and I like driving around and getting 17 mpg out of a 230 hp eng with th400 trans and 342 gears . but step on the go pedal and go to 560 whp and it gets fun fast . you pull up along side a new charger at 55 and stomp on the gas and watch there eyes...
  17. 74propu

    headers b/b c10

    I do believe the pix BUCKET posted is of a c10 by the looks of the a-arm
  18. 74propu

    headers b/b c10

    what year chevelle are they off of if you know??
  19. 74propu

    headers b/b c10

    Where I live has put in speed bumps and I can't get my 86 out . I hit the headers on the speed bumps . I know there is a set of car headers that fits our trucks I just can't remember what headers it is ??? I have a big block in it and need to tuck them up in the frame more then the truck headers do
  20. 74propu

    code 43 knock sensor

    Well I cleaned where the knock sensor screws in to the block and retested it still get a code 43 . So I went and got a sensor for a 4l80e 17 bolt pan $48 screwed it in and wala no code now it runs like a raped ape:party36:
  21. 74propu

    Where to find a window lift plate

    Bobby I have a driver side sash and glass in very good shape out of a 86 . I would take $30 for them if you want to come and get them . I live just south of Ocala on 441 /301 . I have other parts you might want/need
  22. 74propu

    code 43 knock sensor

    thank I will check it out with this info
  23. 74propu

    code 43 knock sensor

    I have a 95 454tbi with a 4l80e 17 bolt pan . I have a code 43 knock sensor ground, open , short to + . I have changed the ecm , knock sensor read out the blue wire from k/s to the ecm no ground found . the wire has continuity from the sensor plug to the ecm .The blue wire at the ecm pin has 2...
  24. 74propu

    BBC pulleys

    When I had the 454 in my 74 I had a serpentine set up on it the serpentine brackets was off a v-6 and used the adapter's from kwik performance .Thay work very well and I liked them on it . my 86 I have all V-belt on it had to make the ac brackets the rest is aftermarket. the 74 had tall valve...
  25. 74propu

    Wiper motor wiring help

    that is right or that is how my wiper is wired

Latest posts

Forum statistics

Threads
44,423
Posts
957,417
Members
36,769
Latest member
Bowtie72
Top