Search results

  1. Splandman

    Bucket seats installed

    Ya, have to pull the console back out to install new seat belts and get it wired up so I can use the USB ports for my phone.
  2. Splandman

    Bucket seats installed

    Console by Splandman posted Jun 28, 2017 at 1:12 PMI have Procar buckets in mine. I like them quite a bit.
  3. Splandman

    1980 c30 truck details

    Love your truck. I need one badly. I would even be happy with a regular cab version. Really need a reg cab, 4X4, one ton with a flatbed.
  4. Splandman

    700r4 Issues

    I was all about this to begin with...but two years later I am pretty discouraged.
  5. Splandman

    700r4 Issues

    I looked at the Gearstar. According to their site, I would need their Level 3 to handle the torque, it's $3300. At that point I would definitely wait and get the 4L80E. Of course I have already spent that at this point, so I would have been money ahead if I had gone that route to begin with. It...
  6. Splandman

    700r4 Issues

    His shop is over in Edmond off Broadway behind Whataburger. 19 W. 5th Street. He is not there too much because he is always out racing or promoting I guess. I could not get him on the phone so I finally left a long message for him through his website. Never heard back. I just moved on and will...
  7. Splandman

    700r4 Issues

    Comstock. Dave did not actually do the work but it was his shop and he was there when I picked it up. While his employee was showing me some features on the Sniper when I picked it up, Dave came out with the box and put it in my other truck. I assumed it had my carb in it. When I took the box...
  8. Splandman

    700r4 Issues

    Is this due to shift points being off? Too early was a big problem on mine. Well the first one absolutely was. They even ended up on the local news on one of the "in your corner" deals. Apparently they had ripped off several people. I believe they did it on purpose because he tried to blame...
  9. Splandman

    700r4 Issues

    Well it's back at A&A now. I am not going to give them any money. If they fix it under warranty I am just hoping it lasts long enough for me to save the money for the TCI 700r4 or the 4L80E. If they say it's not covered under warranty then I am just going to have to tow the truck from Yukon back...
  10. Splandman

    700r4 Issues

    What you are saying here is the same thing Larry Wilson over in Moore told me yesterday. He seemed pretty honest. Said he would rather not build me a 700r4 and that I should go TH 400 or 4L80E. The shop that has been building them is A&A over in Yukon.
  11. Splandman

    700r4 Issues

    The cost of the 4L80E makes it impossible for me at the moment. If cost wasn't an issue for me I would probably just order one from TCI, along with their controller, but it all costs a ton. http://www.tciauto.com/tc/ez-tcutm-transmission-control-unit-gm-4l60-4l65-4l70-4l80-and-4l85e-to-09html...
  12. Splandman

    700r4 Issues

    It was leaking way too much for that. It has been towed back to the trans shop but I don't have a lot of faith it will be fixed correctly. It is under warranty but even if they give it back to me and it's moving, I will probably be searching right away for a replacement. Just not sure if I...
  13. Splandman

    700r4 Issues

    It may not have too much left in there. I was having what I believe are converter issues before it failed. I have to figure out how to get it home. It's only about 4 miles from my Dads ranch and he has some big trailers I can grab but I'm not sure it will drive up the ramps and trailer has no...
  14. Splandman

    700r4 Issues

    I haven't been on here in quite a while. My truck went through quite a few changes, most for the better, but I have been through either 4 or 5 700r4 rebuilds in about 2 years. Here is my current setup. 383 making about 450hp/450 ft. lbs, NP208, 4.10 gears, 33's, 700r4. Last night the 700r4...
  15. Splandman

    re dark brown mahogany interior

    I sold a GMC a few months back with that interior. I searched everywhere for direct replacement parts but never had any luck.
  16. Splandman

    Holley or edelbrock?

    I posted pics of the Dyno Sheets in my build thread. Engine made 429 HP and 446 ft lbs torque with the ProMaxx heads and the Quadrajet built by Mark.
  17. Splandman

    Holley or edelbrock?

    I will post the results in my build thread, sorry Jarhead, didn't mean to hijack your thread. http://www.gmsquarebody.com/forum/showthread.php?t=11972
  18. Splandman

    Holley or edelbrock?

    These heads aren't expensive when compared to other aluminum heads. They are a little more than the Pro Comp heads were but have received much better reviews. I guess I will find out pretty soon if they suck or not. They were $840 shipped. Out of coincidence my machine shop had been contacted by...
  19. Splandman

    Holley or edelbrock?

    When I ordered my carb I told him it was going on a basically stock 350, plans changed and now it's going in a different truck completely. I'm not sure my build is a good gauge for economy. It isn't what I would call radical or anything but certainly a little more than a stock build. The...
  20. Splandman

    Holley or edelbrock?

    Mark built a Quadrajet for me. It's going on a 383 stroker, the engine should be done and on the dyno within a week or two. I will let you know what it does. I am hoping for at least 400hp.
  21. Splandman

    Want a tach........

    Just got off the phone with them and they are building me a tach with the early font. Thanks for the help.
  22. Splandman

    Want a tach........

    I don't. I am just wanting to replace my large gas gauge with the tach/gas gauge combo. I need a tach and don't want to attach one to the column or dash. Rich Weyand is on this site and he has this setup and did run two gas gauges. I think he has a write up on it somewhere on here.
  23. Splandman

    Want a tach........

    Awesome, you just saved me a lot of money. I was trying to figure out how to swing for the money to put all custom gauges in, now I will just go this route.
  24. Splandman

    Want a tach........

    I need one with the font that's on this speedo. It's being picky but I think staring at the two different fonts would get on my nerves.
  25. Splandman

    Want a tach........

    I had no idea you could get the correct font. I thought you were just stuck with what they had.

Latest posts

Forum statistics

Threads
44,173
Posts
950,875
Members
36,291
Latest member
tannerscarber
Top