Search results

  1. J

    Door Window Glass Channel Rock auto vs Lmc

    Has anyone used the LMC glass channel over the Rock auto one? I ordered the majority of my door parts from Rock auto because I source a lot of parts from there. But the glass channels and vent window seals, were just a horrible fit. Anyone have any experience with LMC ones before I order from...
  2. J

    Door Gap

    I actually got out of the truck after my last reply and just gave it a good jolt. It's not exactly perfect. But a whole lot better. Had no idea they were that easy to bend. Thanks for that
  3. J

    Door Gap

    I did happen to drop this door while getting it ready for paint. I don't suppose and drop liek that could have bent it?
  4. J

    Door Gap

    I've had to make the holes bigger and really push the fender ahead. The hood fits excellent. Just this door don't want to cooperate. I had an old door on previous while I was painting these and it fit fine. This is a new aftermarket
  5. J

    Door Gap

    The gap seems fine right around the door. I couldn't get it right on the fender first so I took it off, now I can't get right around the pillar
  6. J

    Door Gap

    I've been all day trying to get this door Gap right and nothing seems to work. It's completely tight on the top, but way off just above the top hinge. I can't adjust it in on the bottomed any more, or I'm on the top hinge.
  7. J

    Chipping Paint

    I had some left over paint, so I touched up the underneath. I had a rattle can made up same color to touch up. Of course I over sprayed a little white on the blue. I got my buddy to pick up some gasket material. I'm gunna mount the mirrors and hopefully get my doors and hood on today. Still have...
  8. J

    Chipping Paint

    I painted my new doors and installed my west coast mirrors, only to chip the paint under under the mirror brackets. What's best way to fix this or just to prevent it from rusting? Is there gasket material I should put underneath to prevent this from happening on the other side?
  9. J

    12v Swap Into 87 C30

    Installed 2 inch body left and painted. Pretty sure I essed up the lines and position of the white stripe but what's done is done now, lol. Have new doors on order. Need to paint the hood, cowl and can visor as well. Put some old doors and the hood on for now to make her weather tight while I...
  10. J

    12v Swap Into 87 C30

    That's interesting, I should definitely look into that
  11. J

    12v Swap Into 87 C30

    Still using the dodge tcase for now, it's driver side drop. But I ain't got anything gm to mate to the 47rh. I had a 208 that I read should match, but spline was different
  12. J

    12v Swap Into 87 C30

    Finally got around to getting some progress on my 12v swap. Truck started out C30 cab and chassis. Swapped Dana 44 I had I under it. Got a 12v pump out of a 94 with a 47rh trans. Used the gforce conversion crossmember and motor mounts. Offroad design for the Springer hangers for the straight...
  13. J

    12v Swap Fuel Sending Units

    Yeah right on, should only have to switch my senders from the tbi ones to carb
  14. J

    12v Swap Fuel Sending Units

    Thanks for that. So u went with sender's with no intank pumps?
  15. J

    12v Swap Fuel Sending Units

    Currently in the process of swapping 12v into 87 cab and chassis 1 ton with saddle tanks. Was originally 350 TBI, I had both tanks had worked fine before. For the swap should I use gas sending units that don't need a pump? Or sending units from 6.2? The gas only has two wires, one for ground...
  16. J

    Fusible link burning up key off

    Just got an 82 k10. Had it running and idling before I bought it. Battery was weak so we boosted it. Was said to have a trans line gone so I had it hauled home. Replaced the battery when I got it home. When I hook the leads to the terminals. It fries the fusible link, with the the ignition off...
  17. J

    GForce Cummins Swap Crossmember and Engine Mounts

    Has anyone on here done Cummins swapped used the gforce drop crossmember and engine mounts. Says they are bolt in, don't require any body lift or other modifications of used together. Any feed back greatly appreciated.
  18. J

    47RH Swap Shift linkage

    Got a chance to buy a full donor truck. 94 12v ppump, 47RH and t-case. Not sure on what t-case tho. I'll be swapping it into my 87 1 ton, that I 4wd swapped, currently has 350tbi, sm465,np 208. The truck was standard but I do have an auto shift column out of an 83, to use. Only concern I...
  19. J

    350 TBI, Can't push gas pedal while idling

    Went out and started my 87 C30 after sitting for jsut over month while I was away. Truck fired right up like usual and idles fine. But my gas pedal is extremely hard to push and when it do move she jumps to really high idle and stays there's even after u let off the pedal. Turn off the truck...
  20. J

    Sm465 knocking while in reverse

    I've went back and double checked the u joints and drive shaft. All good. There is a little slop in the pinion and some play in and out on the output shaft. Tightened by u bolts as well. Still making making same noise. Reverse only, high,l or low rpm, clutch in or out
  21. J

    Sm465 knocking while in reverse

    Just filled it when I put it in the other day, but it wouldn't hurt to double check
  22. J

    Sm465 knocking while in reverse

    I checked it again this morning. It's not as bad an angle as I thought but the pinion is still slightly tipped up more then the shaft. I do think the problem is in the trans. But it only seems to happen in reverse, with foot off the gas. When doors on the gas it don't knock or click until u...
  23. J

    Sm465 knocking while in reverse

    Oof, mine is set close to the bottom one. But there's a wedge under my leafs. That set the angle when I installed new ones. But because I got a long one piece shaft it's not as steep an angle for the long shaft opposed to the shorter 2 piece shaft
  24. J

    Sm465 knocking while in reverse

    Nope, no new fly wheel. The rear end had no issues previous to the trans swap
  25. J

    Sm465 knocking while in reverse

    There brand new and no miles on the expect a bit of yard driving. I can't move the drive shaft at all. No play in it or nothing. Only thing I haven't checked besides u bolts was my transmission Mount

Latest posts

Forum statistics

Threads
44,173
Posts
950,848
Members
36,288
Latest member
brentjo
Top