Search results

  1. hoagster

    Figured out which mirrors I want. Anyone have them?

    @78C10BigTen I don't think you want these. The Square mirrors are 2 different sizes and the mounting brackets are also different. Here's a couple of pictures let me know!
  2. hoagster

    Should I change these while I’ve got it broken down this far ?

    yea if you saw mine you wouldn't have asked! And good job on the how to for those that need to do it but won't strip the body off @Turbo4whl
  3. hoagster

    Figured out which mirrors I want. Anyone have them?

    I need to clean them up, and I'll post picture they have been collecting dust in the barn.
  4. hoagster

    Hey everyone , I'm new here and hope to be around a long while

    Welcome, in the middle of mine, drive train is done, wiring is ready, applying primer to body parts at the moment.
  5. hoagster

    Figured out which mirrors I want. Anyone have them?

    If you find another pair of those I will take them of your hands! And I'll throw in the pair that you see in my emoji I don't need those big things anymore, I will clean them up first!
  6. hoagster

    What have you done to your square lately??

    very nice job! If you don't mind were did you purchase the Kilmat?
  7. hoagster

    What have you done to your square lately??

    Got some primer on the cab finally, one more coat on the bottom then get to the rest.
  8. hoagster

    What have you done to your square lately??

    I'm working on it, I have 4 parent's that are 20 or more older than me both sides of the family I'm retired and I will be 62 in November. I can't do both #)D!M(T!!!
  9. hoagster

    What have you done to your square lately??

    Two more pieces primered Tamco DTA primer. The 100 degree weather finally gave up for a few days. passenger fender next then the cab! Still smoothing things things up on the cab.
  10. hoagster

    Looking at 92 Yukon for my son

    Here's my 94 2500, 205k on it everything works except the A/C. And it needs a complete detailing. It gets used less than 1,000 miles a year. Fixing to put it on the market.
  11. hoagster

    I bought my grandfather’s truck

    Welcome nice truck!
  12. hoagster

    What have you done to your square lately??

    If your rebuilding the motor your going to take it off anyway. either way you'll have to get under there and disconnect the wiring and lower bell housing covers, exhaust flanges, clutch linkage etc,. Take pictures and or tag everything so you know were everything goes. Unless your doing a one...
  13. hoagster

    What have you done to your square lately??

    I would try and get all the bolts off the bell housing first and pull it that way. But the other option is removing the four bolts on the trans. You have removed enough stuff in front of the engine that you should be able to move it forward enough without lifting it to high to clear the input...
  14. hoagster

    What have you done to your square lately??

    @AyWoSch Motors As you can see the transmission is still in it, but we had removed a lot of stuff to get to this point. This is right at the start of my re-build this truck has a sm465/205. The other post I was talking about with the big block removed from a th350 the top bolts were removed...
  15. hoagster

    What have you done to your square lately??

    Just remove the four bolts that attach the sm465 to the bellhousing, the clutch linkage and other obvious stuff. You will have plenty of room to pull it. Don't forget to support the Trans with a jack or jack stands.
  16. hoagster

    What have you done to your square lately??

    I was able to remove the bolts from automatic attached to a big block to remove the engine. Was it easy? No but it can be done.
  17. hoagster

    What have you done to your square lately??

    I was able to remove the bolts from automatic attached to a big block to remove the engine. Was it easy? No but it can be done.
  18. hoagster

    Newbie here!

    Welcome, I got my truck from my dad too! Enjoy it!
  19. hoagster

    New Member

    Welcome, you will find tons of info here! And be sure to post pictures of your project. Again welcome from NorCal
  20. hoagster

    Engine mounts and A/C

    Mine is a 73 K10 4wd, using dirty dingo engine mounts! Not enough clearance to mount the OEM bracket let alone the compressor. second picture is the holley high mount. This is a 2004 LM7 5.3 I would contact dirty dingo and see if they solved the issue!
  21. hoagster

    Rear window clarification

    I have friends in Nevada City, they're safe too so that is good news! Over the past years I have grown to hate this time of year. I live 16 miles outside of Redding head east towards Burney. And we have had to evac several times. So far so good and fingers crossed for everyone!!
  22. hoagster

    Rear window clarification

    @Craig 85 how are you doing down there? Hope all is ok with the fires, have about a 1/2 mile visability up here east of Redding!
  23. hoagster

    Rear window clarification

    Looks good, and the tint is probably darker than original one piece.
  24. hoagster

    Double Dingo's 1965 3/4 Ton "Crusty Biscuit"

    Sorry, wish everyone would just slow down around here also! Poor truck!
  25. hoagster

    Rear window clarification

    What was the source of the after market slider? I would like to go to a slider!

Latest posts

Forum statistics

Threads
44,168
Posts
950,805
Members
36,286
Latest member
goodwrenchca
Top