Search results

  1. AyWoSch Motors

    For the pros.... Axle shaft question. Please advise

    Id just run it as is. Drive like for a couple 10 miles, then change the fluid, and call it good.
  2. AyWoSch Motors

    Does a lift kit exist for 2wd 79 c10?

    Like so??
  3. AyWoSch Motors

    Does a lift kit exist for 2wd 79 c10?

    Well the way it looks, is that its like a block that sits between the spring and the spring perch in the upper a arm, just spaces the spring down so the lower a arm rides lower... maybe. Idk. And yeah, no worried about ride, that truck rides horrible anyway. That short witg HD 1 ton springs...
  4. AyWoSch Motors

    Center console cubby *gray*

  5. AyWoSch Motors

    Does a lift kit exist for 2wd 79 c10?

    I was looking to lift the front of my c30 a bit to level it. Found a 1.5 inch coil spacer block. Is that possible at all?
  6. AyWoSch Motors

    I cant get my new engine to run smooth. Seems untunable.

    If i turned the cap either direction. Advance or retard.. But no worries, it runs great now. Turned out to be a massive vacuum leak threw a super sloppy throttle shaft bushing on the Qjet i had on there..
  7. AyWoSch Motors

    Got Stickers?

    Dnt think ive seen that one
  8. AyWoSch Motors

    What new tools have you got lately?

    Thats awesome, didn't know they made one. I think ill have to get one. I love bauer tools.
  9. AyWoSch Motors

    Got Stickers?

    What show is that?
  10. AyWoSch Motors

    What's the midway point between long bed and short bed?

    I ended up going even farther in that direction than that picture. Check this thing out, my latest toy... 81 c30 dually with a 44inch bed, haha.. Im working on building a bed for it as we speak
  11. AyWoSch Motors

    Assessing rusty engine...

    ^^^What she said, exactly. Once you run it a bit some of that rust will bake off too, and not look so bad. Wont effect how it runs at all, just might make it hard to work on if you have to undo rusty bolts, but thats it. If it bothers you how it looks, you could clean it and paint, rust...
  12. AyWoSch Motors

    1989-1991 Burlwood dash trim plate.

    Sorry, dont have the matching burlwood instrument bezel, but i do have a few solid black 80s style. Heres the one I have. Its bot the best, but not too bad..
  13. AyWoSch Motors

    1989-1991 Burlwood dash trim plate.

    Just happened across a 90 suburban dash, has the burlwood trim. Ill go take pictures, see if its what your looking for...
  14. AyWoSch Motors

    While replacing the front main seal i should.....

    Timing chain and gear, timing cover gasket, front pan gasket, waterpump gaskets, thermostat gasket, new hose clamps, inspect lower hose... Just did all that to my friends c20 recently.
  15. AyWoSch Motors

    While replacing the front main seal i should.....

    You can put the cover in without dropping the pan, its just a PITA. Done it twice. Not fun but doable.
  16. AyWoSch Motors

    Looking for a decent bench seat cover that doesn't break the bank...

    Same here. Seat still looks like new, even though it gets used everyday, because it's been covered its whole life. Wanna keep it that way, because i use it, and if im gonna get grease and dirt on the seat, want it to be on the cover instead.
  17. AyWoSch Motors

    Rear Brake Line Bracket

    Oh okay, passenger side, gotcha. Ill go look tomorrow .
  18. AyWoSch Motors

    Rear Brake Line Bracket

    What exactly does it look like again. I looked at my 3 parts frames, and all three are different looking?
  19. AyWoSch Motors

    A few more square parts for sale

    Is that the plastic air damn thing that goes under the bumper? I was just thinking of one of those things...
  20. AyWoSch Motors

    Door swap Question

    Yes, doors will fit no problem, but i don't think your door panels will fit the same...
  21. AyWoSch Motors

    Where can i find this??

    Happy help any of you guys out. Makes me happy to know i can contribute to keeping these awesome old trucks on the road and help a fellow squarebody bro. Thats why i have parts trucks. If i have the part, and can remember/make time to get it, i will.
  22. AyWoSch Motors

    Rear Brake Line Bracket

    I forgot about the exhaust hanger. I just picked up a K20, probabaly has both. Ill look tomorrow
  23. AyWoSch Motors

    Where can i find this??

    @devinthedude This is it right? Just pulled it off my 85 parts cab. Was able to carefully pull the connector out of the canon plug too, so you don't have to splice it. If you want it, PM me with your address and I'll get it sent out in the next day or 2...
  24. AyWoSch Motors

    Mystery Motor Mounts

    I have a 81 c30, that had a straight 6 in it. I put in a passenger side mount bracket from a 78 c10, engine mounts from a 98 tahoe 350, block brackets from an 84 305, and a talldeck 427 from an 82 dump truck. For some reason it didn't all line up perfectly, i have no idea why, hahaha.
  25. AyWoSch Motors

    Where can i find this??

    What year range truck? Also, is it engine bay side, or interior side? AC or non AC? I have a bunch of square harnesses, in various conditions boxed up, just need to know what box to look in...

Latest posts

Forum statistics

Threads
44,157
Posts
950,599
Members
36,273
Latest member
dannyphx
Top