Search results

  1. Craig Nedrow

    Problem solved

    If you have a head gasket leak, it can be from a few bubbles, to blowing all the water out when the radiator cap is off. With the cap off and the engine warm, idling, are there bubbles? when you up the RPM's, are there more bubbles or does it blow the water out? In any case, there should be no...
  2. Craig Nedrow

    Good street cam?

    Got an RV cam in my truck
  3. Craig Nedrow

    1979 Big 10 Engine & Transmission Upgrade

    Look great Mark. The shop where I work has been in the same location for about fifty years, and they are Chevy guys, have a bunch of 2.02's....watching the progress. What are the cam specs?
  4. Craig Nedrow

    All in the family

    Love the trucks stance...just right. Welcome from central WA St.
  5. Craig Nedrow

    New Member and new owner of a 1976 K20

    Welcome from central Wa. St. This is a great forum, lots of help, but caution don't piss off Rusty Nail....Post some pics.
  6. Craig Nedrow

    Posi Traction

    I really Yukon gear, use it and no problems behind the 454. Here is the GM section....https://www.yukongear.com/shop-by-diff?model=GM Go here, about page 3 for my locker swap: https://www.gmsquarebody.com/threads/1973-k20-350-to-454-swap.29840/ I like the 3.73 gears in my K10.
  7. Craig Nedrow

    Hubs

    My 73 K20 has the Warn hubs that turn almost one full turn to engage. I have a Dana44 with spartin lunch box locker in front. I have driven it locked in and in two wheel drive, and it drives the same on the hwy. When four wheel is engaged, you can really tell it is in, does not like dry asphalt...
  8. Craig Nedrow

    Whats the going rate for shortening a driveshaft? I think I got....shafted

    Elloit, love your 66. Doing the same to a 64 400 sport coupe, had it for years, did the body work like you, hope to paint it this next year and get it on the road. Thanks for the inspiration!!
  9. Craig Nedrow

    Whats the going rate for shortening a driveshaft? I think I got....shafted

    Gotta get to the shop, doing rods today, nice sit down job for an ol' coggie.
  10. Craig Nedrow

    Whats the going rate for shortening a driveshaft? I think I got....shafted

    I have made quite a few driveshafts, consider what is involved..setting up a steady rest, cutting on the weld till you get to the yoke, knock off the yoke, face and chamfer inside and outside for the weld. Put it back in the lathe and press it together with a straight edge on each end to to...
  11. Craig Nedrow

    Best gear ratio for 8 inch lift and 40s?

    If you go to different gears, Randy's ring and pinion, (Randy's worldwide,) has everything. Yukon brand.
  12. Craig Nedrow

    20 Year OBS Owner, Trying out the Squarebody

    Hey Jeff, live just across the Cascades. Welcome!!
  13. Craig Nedrow

    Maxwellvis. A 20 year old with a 1949 Chevrolet truck.

    First pic is a 235 rebuilt 235 ready to go. That was the original motor, and I drove it all over once to Gainsville FL via texas from WA ST. second pic is the truck it was in, replaced by a 283 hp 283, muncie four speed, 4:56 rear from a 62 chevy. Loved that truck. One of the ones I still have...
  14. Craig Nedrow

    GM 8.5" 10 bolt nightmare.

    I used a spartin lunch box locker in my1973 d44. go here foe the info/build. https://www.gmsquarebody.com/threads/1973-k20-front-d44-spartan-locker-install.35594/
  15. Craig Nedrow

    Maxwellvis. A 20 year old with a 1949 Chevrolet truck.

    My first ride ever was a 52 GMC with a 228 motor, caught the bug and have had close to twenty over the years. Still have four, love that body style.
  16. Craig Nedrow

    Valve seal o-ring question

    Older motors just used the O-ring, but there is a tool that machine shops used to cut for the PC type (umbrella) seal. look at the valve stem where it comes out of the head, it is most likely machined VS cast. If so use a PC (felpro) seals much better.
  17. Craig Nedrow

    My project

    Hi Ray, Hey went through the same thing...twice, so I feel for you. If you have the heads off, just put a little clay in the piston eyebrows, install the head with a couple bolts, turn motor over a few times. Pull heads and measure clearance. You probably already know that, but easy to do, don't...
  18. Craig Nedrow

    Stock Tire Size

    Ok, ok 16.5 33 12.5'S, can't find them anymore, boohoo
  19. Craig Nedrow

    question on 85 C10

    Mike, excellent info. I saved it for the future.....
  20. Craig Nedrow

    Engine swap for street and towing

    The vortec is a roller motor, makes more HP then the marklV, and is the preferred motor. Richard Holdner has done many mods to them and is a welth of info. You will need a good 750 holly style carb, or bigger if you mod it much. there are carb formulas at Summit. I really like the E-bock air gap...
  21. Craig Nedrow

    1979 Big 10 Engine & Transmission Upgrade

    Mark is a great and careful machinist, have been following him because I learn from him, and he gets results.
  22. Craig Nedrow

    Playing with hookers today. 10 out of 10!

    Here is my Bosch bung location: Where AEM said to put it. Have had it in over a year and no problems. Awesome tuning aid.
  23. Craig Nedrow

    Engine swap for street and towing

    I have had two 350's and a 454. Matt is right I believe. I have had two 350's and now a 454. Here is the swap, super easy: https://www.gmsquarebody.com/threads/1973-k20-350-to-454-swap.29840/ I am a retired machinist that went back to work in a speed shop machining engines. The olds have big...
  24. Craig Nedrow

    Hydroboost worth it?

    I have a good friend, (brother) that is giving me a 84 Burb has hydra boost, gonna put it on my truck. I tow and haul quite a bit, and the hydra boost will fit my needs. Wife hates that I am getting another truck, my fourth Square. Also not to happy about the 71 ford f250...but it's cool.
  25. Craig Nedrow

    Do I rebuild my SBC or swap for an LS3?

    I love these threads...I have had two 350 in my truck, and now I have a 454, my first big block. One 350 was stock with an AFB, ran will till it died. Second SB was a circle track motor I built years ago and was setting in the shop. Big cam sounded so sweet, except at the gas pump. It also had...

Latest posts

Forum statistics

Threads
44,157
Posts
950,559
Members
36,268
Latest member
JUKA
Top