Search results

  1. AuroraGirl

    Ice Cube Fuse Fail

    Have you ever been diagnosed as being on the spectrum? just curious, but the flow of information and ideas speaks to me as that, and theres nothing wrong with that. Ill forgive you this once lol jk
  2. AuroraGirl

    Fuse Block No power to BAT fuse connector

    didnt realize the taps were fused first ,. thats good to know. so all those labled B in your diagram are fused by Horn/DM?
  3. AuroraGirl

    Turbo350 w/shift kit slamming 2nd gear

    I would think it would shift more consistently with a new spring in addition to being softer.
  4. AuroraGirl

    Ice Cube Fuse Fail

    @RanchWelder taken at face value, you threw the first stone. Even if ricko was stalking your posts in order to troll you, his question, I feel ,is as valid as it would have been Had I asked it. Because at first glance I dont see the issue, but upon reading your post a couple times and using the...
  5. AuroraGirl

    P/S pump pressure side fitting size on 97/07. Want to convert to AN fitting (pic's)

    turned what would have been a fine conversation into the end of one.
  6. AuroraGirl

    I never knew how hot P/S fluid gets. New conversion. Pic's inside.

    power steering CAN be setup to be less wasteful, but its usually at the cost of complexity that then becomes outweighed by electrics simplicity the type 2 pump is actually able ot handle more RPMs than the P pump. But if the diameter of the pulley is different, you would need to calculate the...
  7. AuroraGirl

    P/S pump pressure side fitting size on 97/07. Want to convert to AN fitting (pic's)

    its weird you would describe the steering as the same and sounds the same, but i wont question it as long as it meets your needs. and good adding a cooler, the saginaw p pump makes more heat. what fluid you using?
  8. AuroraGirl

    P/S pump pressure side fitting size on 97/07. Want to convert to AN fitting (pic's)

    so are you going back to a saginaw p pump to get more floaty steering , quieter steering, or to turn buigger tires at lower RPM?
  9. AuroraGirl

    P/S pump pressure side fitting size on 97/07. Want to convert to AN fitting (pic's)

    are you using hydroboost? If not you would benefit from a type II (TC) pump, but that has a different fitting aswell.
  10. AuroraGirl

    Lawn/ Garden tractors/ Riding Mowers, Cool Mods and tinkering

    This brand, kumar brothers, is what i got for our gx335 https://www.walmart.com/ip/New-Kumar-Bros-USA-Upper-Hood-With-LH-RH-Decal-Set-Fits-John-Deere-GX255-GX325-GX335/389507015?wmlspartner=wlpa&selectedSellerId=10125 I dont remember what ours is exactly but its in that same range of mower size...
  11. AuroraGirl

    Been runnin on empty for 40 miles!

    midget g-hole
  12. AuroraGirl

    Been runnin on empty for 40 miles!

    at least its not an aux tank on a 1967-1972 chevy, this is an aftermarket solution someone could have ended up stabbing a hole in your bed floor for :superhack:
  13. AuroraGirl

    Been runnin on empty for 40 miles!

    if you can find a good bedside and filler neck id think that would be the best fit, but i would do return style fuel system at the same time if i were you but its all your choice of course.
  14. AuroraGirl

    Been runnin on empty for 40 miles!

    if its steel i wonder if it maybe is rusty inside compared to the normal gas tank and the wiper on the level sender isnt getting full travel And interesting
  15. AuroraGirl

    Lawn/ Garden tractors/ Riding Mowers, Cool Mods and tinkering

    You can get a new "top" for yoiur john deere hood pretty affordably, as long as your lower hood is ok. you have tape on it but if you can epoxy weld the crack and its not trying to fall apart on you, the top is still over 50$ but you can just screw it on and it will give it more structure and...
  16. AuroraGirl

    Been runnin on empty for 40 miles!

    the only thing I would say is what is the fuel tank switching valve, is it the motorized pollack valve? or is it the old solenoid? Theres a chance that its pulling gas out of the other tank and that tank if its the old style. also would be interested in seeing what the aux tank looks like
  17. AuroraGirl

    What new tools have you got lately?

    THANK YOU FOR SHOWING ME THIS. I WILL BUY ONE FOR MY HACKZALL (12v one handed unit) or my old NiCd 18v sawzall. I needed this!
  18. AuroraGirl

    What new tools have you got lately?

    Yes I agree, im fortunate I have a lot of old quality ish taps from my gpa but none of them were organized, and a lot of them have surface rusted so I cant read them for the size some of the time. But im working on getting them all together, then sorting. Got about 2 coffee cans worth of them...
  19. AuroraGirl

    What new tools have you got lately?

    i have a plastic case set from menards.. pure junk. probably can clean threads ok but for cutting them.. no. the taps were better than the dies in this regard, but the hardness on the taps doesnt seem up to snuff. Now the hardness on my plug thread chaser is really nice, but that only has 2...
  20. AuroraGirl

    What new tools have you got lately?

    I last bought sunco LED tubes to do my shed (Had to do about 40 between my house and shed and garage and a couple for family.) I have yet to have a single tube fail, 4 of them have been constantly on since 2019 except for power losses once in a while. Great light output, and single ended...
  21. AuroraGirl

    Does it matter where this spring connects?

    So really I should have used the top opening on the bracket to get that spring more in line yes?
  22. AuroraGirl

    Edelbrock 660 electric choke

    nvm
  23. AuroraGirl

    Edelbrock 660 electric choke

    nvm
  24. AuroraGirl

    How can i separate my rotor from hub? Looks like its all one piece need help!

    sounds like the friction material is very specific formulation of things that need to be heated just right to wear properly. the brakes last longer 1) because the rear brakes now do more than they used to 2) the surfaces are larger 3) they cool better 4) the materials have changed from...
  25. AuroraGirl

    Proportioning valve vs. load sensing valve

    for the GM reasons its more or less "if the truck is outside of factory specifications, remove the thing." and that could mean clapped suspension, lift blocks, wider tires, etc.

Latest posts

Forum statistics

Threads
44,157
Posts
950,592
Members
36,271
Latest member
jstewart7501
Top